All MIBs › DOCS-IF-MIB › docsIfSigQSignalNoise
docsIfSigQSignalNoise
Module: DOCS-IF-MIB
OID (symbolic): DOCS-IF-MIB::docsIfSigQSignalNoise
OID (numeric): 1.3.6.1.2.1.10.127.1.1.4.1.5
Node type: OBJECT-TYPE
Type: TenthdB
Access: read-only
Description: Signal/Noise ratio as perceived for this channel. At the CM, this object describes the Signal/Noise of the downstream channel. At the CMTS, it describes the average Signal/Noise of the upstream channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.1.1.4.1.5 snmpwalk -v2c -c public <target> DOCS-IF-MIB::docsIfSigQSignalNoise
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.1.1.4.1.5.1 snmpget -v2c -c public <target> DOCS-IF-MIB::docsIfSigQSignalNoise.1
Start monitoring DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral CableLabs/IETF standard RFC 4546) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IF-MIB::docsIfSigQSignalNoise OID value, configure state conditions and alerts, and monitor any DOCSIS 2.0 cable modem/CMTS (RF interface, vendor-neutral CableLabs/IETF standard RFC 4546) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1 | docsIfMibObjects | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.1 | docsIfBaseObjects | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.1.4 | docsIfSignalQualityTable | DOCS-IETF-RFI-MIB |
| 1.3.6.1.2.1.10.127.1.1.4.1 | docsIfSignalQualityEntry | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.1.1.4.1.5 | docsIfSigQSignalNoise | DOCS-IF-MIB |