DOCS-IETF-QOS-MIB :: docsIetfQosServiceFlowPolicedDropPkts

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOCS-IETF-QOS-MIB › docsIetfQosServiceFlowPolicedDropPkts

docsIetfQosServiceFlowPolicedDropPkts

Module: DOCS-IETF-QOS-MIB

OID (symbolic): DOCS-IETF-QOS-MIB::docsIetfQosServiceFlowPolicedDropPkts

OID (numeric): 1.3.6.1.2.1.127.1.4.1.6

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: For outgoing service flows, this object counts the number of Packet Data PDUs classified to this service flow dropped due to: (1) implementation-dependent excessive delay while enforcing the Maximum Sustained Traffic Rate; or (2) UGS packets dropped due to exceeding the Unsolicited Grant Size with a Request/Transmission policy that requires such packets to be dropped.

Classified packets dropped due to other reasons

must be counted in ifOutDiscards for the interface of this service flow. This object reports 0 for incoming service flows.

This counter's last discontinuity is the ifCounterDiscontinuityTime for the same ifIndex that indexes this object.

What is docsIetfQosServiceFlowPolicedDropPkts?

Counts outgoing packets on this flow dropped either because enforcing the maximum sustained traffic rate caused excessive delay, or because a UGS flow's request/transmission policy requires dropping packets that exceed the unsolicited grant size; always 0 for incoming flows. Rising values here point to a flow whose configured rate or grant size is too small for its actual traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.127.1.4.1.6
snmpwalk -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosServiceFlowPolicedDropPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.127.1.4.1.6.1
snmpget -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosServiceFlowPolicedDropPkts.1

Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-QOS-MIB::docsIetfQosServiceFlowPolicedDropPkts OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.127docsIetfQosMIBDOCS-IETF-QOS-MIB
1.3.6.1.2.1.127.1docsIetfQosMIBObjectsDOCS-IETF-QOS-MIB
1.3.6.1.2.1.127.1.4docsIetfQosServiceFlowStatsTableDOCS-IETF-QOS-MIB
1.3.6.1.2.1.127.1.4.1docsIetfQosServiceFlowStatsEntryDOCS-IETF-QOS-MIB
1.3.6.1.2.1.127.1.4.1.6docsIetfQosServiceFlowPolicedDropPktsDOCS-IETF-QOS-MIB