All MIBs › DOCS-IETF-QOS-MIB › docsIetfQosPktClassEnetProtocol
docsIetfQosPktClassEnetProtocol
Module: DOCS-IETF-QOS-MIB
OID (symbolic): DOCS-IETF-QOS-MIB::docsIetfQosPktClassEnetProtocol
OID (numeric): 1.3.6.1.2.1.127.1.1.1.21
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: If docsIetfQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule.
If dosQosPktClassEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule.
If docsIetfQosPktClassEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule.
If docsIetfQosPktClassEnetProtocolType is mac(3), the lower 8 bits of this object's value represent a lower bound (inclusive) of MAC management message type codes matched, and the upper 8 bits represent the upper bound (inclusive) of matched MAC message type codes. Certain message type codes are excluded from matching, as specified in the reference.
If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header.
If the referenced parameter is not present in the classifier, the value of this object is reported as 0.
What is docsIetfQosPktClassEnetProtocol?
Holds the actual protocol value to match, whose meaning depends on docsIetfQosPktClassEnetProtocolType: an EtherType (e.g. 0x0800 for IPv4) when type is ethertype, a DSAP byte when type is dsap, or a packed low/high MAC-message-type range when type is mac; ignored when type is none. Reported as 0 by default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.127.1.1.1.21 snmpwalk -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosPktClassEnetProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.127.1.1.1.21.1 snmpget -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosPktClassEnetProtocol.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-QOS-MIB::docsIetfQosPktClassEnetProtocol OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.127 | docsIetfQosMIB | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1 | docsIetfQosMIBObjects | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.1 | docsIetfQosPktClassTable | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.1.1 | docsIetfQosPktClassEntry | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.1.1.21 | docsIetfQosPktClassEnetProtocol | DOCS-IETF-QOS-MIB |