All MIBs › DOCS-IETF-QOS-MIB › docsIetfQosParamSetTolPollJitter
docsIetfQosParamSetTolPollJitter
Module: DOCS-IETF-QOS-MIB
OID (symbolic): DOCS-IETF-QOS-MIB::docsIetfQosParamSetTolPollJitter
OID (numeric): 1.3.6.1.2.1.127.1.2.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an upstream Service Flow.
This parameter is applicable only to upstream Service Flows with a DocsIetfQosSchedulingType of realTimePollingService(4) or unsolictedGrantServiceWithAD(5).
If the referenced parameter is applicable but not present in the corresponding DOCSIS QOS Parameter Set, the CMTS uses an implementation-dependent value and reports the value it is using. The CM reports a value of 0 in this case.
If the parameter is not applicable to the direction or upstream scheduling type of the Service Flow, both CMTS and CM report this object's value as 0.
What is docsIetfQosParamSetTolPollJitter?
The maximum allowed delay, in microseconds, of a unicast request opportunity from its nominal schedule, applicable only to real-time polling and UGS-with-AD flows; reported as 0 where not applicable. Tightening this improves the timing predictability of upstream request opportunities, which matters most for real-time traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.12 snmpwalk -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetTolPollJitter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.12.1 snmpget -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetTolPollJitter.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-QOS-MIB::docsIetfQosParamSetTolPollJitter OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.127 | docsIetfQosMIB | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1 | docsIetfQosMIBObjects | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2 | docsIetfQosParamSetTable | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1 | docsIetfQosParamSetEntry | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1.12 | docsIetfQosParamSetTolPollJitter | DOCS-IETF-QOS-MIB |