All MIBs › DOCS-IETF-QOS-MIB › docsIetfQosParamSetNomPollInterval
docsIetfQosParamSetNomPollInterval
Module: DOCS-IETF-QOS-MIB
OID (symbolic): DOCS-IETF-QOS-MIB::docsIetfQosParamSetNomPollInterval
OID (numeric): 1.3.6.1.2.1.127.1.2.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream Service Flow.
This object applies only to upstream Service Flows with DocsIetfQosSchedulingType of value nonRealTimePollingService(3), realTimePollingService(4), and unsolictedGrantServiceWithAD(5). The parameter is mandatory for realTimePollingService(4). If the parameter is omitted with nonRealTimePollingService(3), the CMTS uses an implementation-dependent value. If the parameter is omitted with unsolictedGrantServiceWithAD(5), the CMTS uses as a default value the value of the Nominal Grant Interval parameter. In all cases, the CMTS reports the value it is using when the parameter is applicable. The CM reports the signaled parameter value if it was signaled, and 0 otherwise.
If the referenced parameter is not applicable to the direction or scheduling type of the corresponding DOCSIS QOS Parameter Set, both CMTS and CM report this object's value as 0.
What is docsIetfQosParamSetNomPollInterval?
The nominal interval, in microseconds, between unicast request opportunities the CMTS grants this upstream flow; mandatory for real-time polling service and otherwise CMTS-implementation-dependent. Directly affects how quickly a device can ask for more upstream bandwidth, which matters for interactive or real-time applications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.11 snmpwalk -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetNomPollInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.11.1 snmpget -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetNomPollInterval.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-QOS-MIB::docsIetfQosParamSetNomPollInterval OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.127 | docsIetfQosMIB | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1 | docsIetfQosMIBObjects | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2 | docsIetfQosParamSetTable | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1 | docsIetfQosParamSetEntry | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1.11 | docsIetfQosParamSetNomPollInterval | DOCS-IETF-QOS-MIB |