All MIBs › DOCS-IETF-QOS-MIB › docsIetfQosParamSetMaxTrafficBurst
docsIetfQosParamSetMaxTrafficBurst
Module: DOCS-IETF-QOS-MIB
OID (symbolic): DOCS-IETF-QOS-MIB::docsIetfQosParamSetMaxTrafficBurst
OID (numeric): 1.3.6.1.2.1.127.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied in conjunction with docsIetfQosParamSetMaxTrafficRate to calculate maximum sustained traffic rate.
If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object for scheduling types bestEffort (2), nonRealTimePollingService(3), and realTimePollingService(4) is 3044.
If this parameter is not applicable, it is reported as 0.
What is docsIetfQosParamSetMaxTrafficBurst?
The token-bucket burst size in bytes used alongside the max traffic rate to smooth out bursty traffic; defaults to 3044 bytes for best-effort and polling service types, or 0 where not applicable. A too-small burst size can make a connection feel throttled even when the sustained rate is adequate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.4 snmpwalk -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetMaxTrafficBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.127.1.2.1.4.1 snmpget -v2c -c public <target> DOCS-IETF-QOS-MIB::docsIetfQosParamSetMaxTrafficBurst.1
Start monitoring DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-IETF-QOS-MIB::docsIetfQosParamSetMaxTrafficBurst OID value, configure state conditions and alerts, and monitor any DOCSIS 1.1/2.0 cable modem/CMTS (QoS, vendor-neutral IETF standard RFC 4323) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.127 | docsIetfQosMIB | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1 | docsIetfQosMIBObjects | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2 | docsIetfQosParamSetTable | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1 | docsIetfQosParamSetEntry | DOCS-IETF-QOS-MIB |
| 1.3.6.1.2.1.127.1.2.1.4 | docsIetfQosParamSetMaxTrafficBurst | DOCS-IETF-QOS-MIB |