DOCS-CABLE-DEVICE-MIB :: docsDevSwServerAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-CABLE-DEVICE-MIBdocsDevSwServerAddress

docsDevSwServerAddress

Module: DOCS-CABLE-DEVICE-MIB

OID (symbolic): DOCS-CABLE-DEVICE-MIB::docsDevSwServerAddress

OID (numeric): 1.3.6.1.2.1.69.1.3.7

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: The address of the TFTP or HTTP server used for software upgrades.

If the TFTP/HTTP server is unknown, return the zero- length address string (see the TextualConvention).

If docsDevSwServer is also implemented in this agent, this object is tied to it. A set of this object to an IPv4 address will result in also setting the value of docsDevSwServer to that address. If this object is set to an IPv6 address, docsDevSwServer is set to 0.0.0.0. If docsDevSwServer is set, this object is also set to that value. Note that if both are set in the same action, the order of which one sets the other is undefined.

What is docsDevSwServerAddress?

Sets the address of the TFTP or HTTP server the device should fetch its next firmware image from; a zero-length address means the server is unknown. Setting this to an IPv4 address also updates the legacy docsDevSwServer object to match (and setting an IPv6 address zeroes it out instead), since the two are kept in sync.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.69.1.3.7
snmpwalk -v2c -c public <target> DOCS-CABLE-DEVICE-MIB::docsDevSwServerAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.69.1.3.7.1
snmpget -v2c -c public <target> DOCS-CABLE-DEVICE-MIB::docsDevSwServerAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.69.1.3.7.1 s <value>

Start monitoring DOCSIS cable modem/CMTS (device management, vendor-neutral IETF standard RFC 4639) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-CABLE-DEVICE-MIB::docsDevSwServerAddress OID value, configure state conditions and alerts, and monitor any DOCSIS cable modem/CMTS (device management, vendor-neutral IETF standard RFC 4639) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.69docsDevDOCS-CABLE-DEVICE-MIB
1.3.6.1.2.1.69.1docsDevMIBObjectsDOCS-CABLE-DEVICE-MIB
1.3.6.1.2.1.69.1.3docsDevSoftwareDOCS-CABLE-DEVICE-MIB
1.3.6.1.2.1.69.1.3.7docsDevSwServerAddressDOCS-CABLE-DEVICE-MIB