All MIBs › DOCS-CABLE-DEVICE-MIB › docsDevFilterIpStatus
docsDevFilterIpStatus
Module: DOCS-CABLE-DEVICE-MIB
OID (symbolic): DOCS-CABLE-DEVICE-MIB::docsDevFilterIpStatus
OID (numeric): 1.3.6.1.2.1.69.1.6.4.1.2
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description:
Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row that matches all inbound packets on the ethernet interface and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active.
What is docsDevFilterIpStatus?
This OID controls whether a packet filtering rule exists and is active on a cable modem or headend, determining if certain traffic is blocked or allowed. You can create, delete, or disable filters by changing this value. A cable operator would use this to turn on or off specific IP traffic rules when managing customer bandwidth or blocking unwanted traffic.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.69 | docsDev | DOCS-CABLE-DEVICE-MIB |
| 1.3.6.1.2.1.69.1 | docsDevMIBObjects | DOCS-CABLE-DEVICE-MIB |
| 1.3.6.1.2.1.69.1.6 | docsDevFilter | DOCS-CABLE-DEVICE-MIB |
| 1.3.6.1.2.1.69.1.6.4 | docsDevFilterIpTable | DOCS-CABLE-DEVICE-MIB |
| 1.3.6.1.2.1.69.1.6.4.1 | docsDevFilterIpEntry | DOCS-CABLE-DEVICE-MIB |
| 1.3.6.1.2.1.69.1.6.4.1.2 | docsDevFilterIpStatus | DOCS-CABLE-DEVICE-MIB |