dmaNodeNum

OID (symbolic): DMA200-MIB::dmaNodeNum

OID (numeric): 1.3.6.1.4.1.498.3.7.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Number of DMA-200 and PMC-100 nodes in the system. Firmware revisions E- and below have a maximum of 20 nodes Firmware revisions F- and above have a maximum of 40 nodes

What is dmaNodeNum?

This reports the current count of DMA-200 and PMC-100 nodes configured in the system, capped at 20 or 40 nodes depending on firmware revision. An admin checks this to confirm how many remote nodes the system currently manages and whether they're approaching the firmware's node limit before adding more. For example, seeing dmaNodeNum at 40 on an F-revision unit means the node table is fully populated at its firmware maximum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.3.7.2.1
snmpwalk -v2c -c public <target> DMA200-MIB::dmaNodeNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.3.7.2.1.1
snmpget -v2c -c public <target> DMA200-MIB::dmaNodeNum.1

Start monitoring GDC DMA200 series WAN multiplexer/access device (dial-backup) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DMA200-MIB::dmaNodeNum OID value, configure state conditions and alerts, and monitor any GDC DMA200 series WAN multiplexer/access device (dial-backup) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.498	gdc	DMA200-MIB
1.3.6.1.4.1.498.3	sc	DMA200-MIB
1.3.6.1.4.1.498.3.7	dmaSystem	DMA200-MIB
1.3.6.1.4.1.498.3.7.2	dmaNode	DMA200-MIB
1.3.6.1.4.1.498.3.7.2.1	dmaNodeNum	DMA200-MIB

DMA200-MIB :: dmaNodeNum

dmaNodeNum

Module

This MIB depends on