DLINKSW-NETWORK-ACCESS-MIB :: dnaSessionTerminateIfMethodList

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DLINKSW-NETWORK-ACCESS-MIB › dnaSessionTerminateIfMethodList

dnaSessionTerminateIfMethodList

Module: DLINKSW-NETWORK-ACCESS-MIB

OID (symbolic): DLINKSW-NETWORK-ACCESS-MIB::dnaSessionTerminateIfMethodList

OID (numeric): 1.3.6.1.4.1.171.26.151.1.3.3.1.1

Node type: OBJECT-TYPE

Type: DlinkAuthMethodList

Access: read-write

Description: This object is used to terminate authentication sessions by methods on an interface by setting the corresponding bit to '1'.

This object always returns '00'H when read.

What is dnaSessionTerminateIfMethodList?

A bitmask of authentication methods used to terminate sessions on this interface that were authorized by the selected method(s); setting the bit for a method and writing it terminates matching sessions on the port, and reading this object always returns all-zero. An admin uses this to bulk-terminate, say, all MAC-authenticated sessions on a port without affecting sessions authorized by 802.1x on the same port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.3.3.1.1
snmpwalk -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaSessionTerminateIfMethodList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.3.3.1.1.1
snmpget -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaSessionTerminateIfMethodList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.151.1.3.3.1.1.1 s <value>

Start monitoring D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-NETWORK-ACCESS-MIB::dnaSessionTerminateIfMethodList OID value, configure state conditions and alerts, and monitor any D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.151dlinkSwNetworkAccessAuthMIBDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1dNetAccessAuthMIBObjectsDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.3dNetAuthSessionDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.3.3dnaSessionTerminateIfTableDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.3.3.1dnaSessionTerminateIfEntryDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.3.3.1.1dnaSessionTerminateIfMethodListDLINKSW-NETWORK-ACCESS-MIB