All MIBs › DLINKSW-NETWORK-ACCESS-MIB › dnaPortReauthInterval
dnaPortReauthInterval
Module: DLINKSW-NETWORK-ACCESS-MIB
OID (symbolic): DLINKSW-NETWORK-ACCESS-MIB::dnaPortReauthInterval
OID (numeric): 1.3.6.1.4.1.171.26.151.1.2.2.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specifies the re-authentication interval, after which the port will be re-authenticated if value of the corresponding instance of dnaPortReauthEnabled is 'true'.
A value of zero indicates that the re-authentication interval is based on AAA server when this port is authenticated. Besides, the action (re-authenticate or initialize) to take after expiration of the timer is also based on server.
What is dnaPortReauthInterval?
The interval, in seconds, after which this port's session is re-authenticated when dnaPortReauthEnabled is true; a value of zero means the re-authentication timing (and whether to reauthenticate or reinitialize) is instead dictated by the AAA server. An admin sets an explicit interval here to control re-authentication timing locally rather than deferring entirely to the RADIUS server's session-timeout attribute.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.6 snmpwalk -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortReauthInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.6.1 snmpget -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortReauthInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.6.1 i <value>
Start monitoring D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-NETWORK-ACCESS-MIB::dnaPortReauthInterval OID value, configure state conditions and alerts, and monitor any D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.26 | dlinkIndustrialCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.26.151 | dlinkSwNetworkAccessAuthMIB | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1 | dNetAccessAuthMIBObjects | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2 | dNetAuthAuthenticator | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2 | dnaPortConfigTable | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2.1 | dnaPortConfigEntry | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2.1.6 | dnaPortReauthInterval | DLINKSW-NETWORK-ACCESS-MIB |