DLINKSW-NETWORK-ACCESS-MIB :: dnaPortMethodAvailable

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DLINKSW-NETWORK-ACCESS-MIB › dnaPortMethodAvailable

dnaPortMethodAvailable

Module: DLINKSW-NETWORK-ACCESS-MIB

OID (symbolic): DLINKSW-NETWORK-ACCESS-MIB::dnaPortMethodAvailable

OID (numeric): 1.3.6.1.4.1.171.26.151.1.2.3.1.1

Node type: OBJECT-TYPE

Type: DlinkAuthMethodList

Access: read-only

Description: This object indicates the currently effective authentication methods on the port.

e.g: The dnaPortMethodCompAuthMode of the interface is set to any(1), but only dot1x is running on this interface, macAuth, webAuth and jwac are disabled, only the bit of dot1x is '1'.

What is dnaPortMethodAvailable?

Shows which authentication methods (802.1x, MAC auth, web auth, JWAC) are actually running on this port right now, as a bitmask, reflecting the effective subset of dnaPortMethodCompAuthMode's configured methods; for example, if compound mode is set to any(1) but only 802.1x is actually enabled, only the dot1x bit will be set. An admin reads this to verify which authentication method(s) are truly active on a port versus just configured as allowed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.3.1.1
snmpwalk -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortMethodAvailable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.3.1.1.1
snmpget -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortMethodAvailable.1

Start monitoring D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-NETWORK-ACCESS-MIB::dnaPortMethodAvailable OID value, configure state conditions and alerts, and monitor any D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.151dlinkSwNetworkAccessAuthMIBDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1dNetAccessAuthMIBObjectsDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.2dNetAuthAuthenticatorDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.2.3dnaPortMethodTableDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.2.3.1dnaPortMethodEntryDLINKSW-NETWORK-ACCESS-MIB
1.3.6.1.4.1.171.26.151.1.2.3.1.1dnaPortMethodAvailableDLINKSW-NETWORK-ACCESS-MIB