All MIBs › DLINKSW-NETWORK-ACCESS-MIB › dnaPortAuthVlansSecond2K
dnaPortAuthVlansSecond2K
Module: DLINKSW-NETWORK-ACCESS-MIB
OID (symbolic): DLINKSW-NETWORK-ACCESS-MIB::dnaPortAuthVlansSecond2K
OID (numeric): 1.3.6.1.4.1.171.26.151.1.2.2.1.4
Node type: OBJECT-TYPE
Type: Dlink2kVlanList
Access: read-write
Description: This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN needs authentication.
What is dnaPortAuthVlansSecond2K?
A bitmap, one bit per VLAN for VLAN IDs 2049 through 4094, marking which of those higher-numbered VLANs require authentication on this port; a bit set to 1 means that VLAN needs authentication. An admin uses this alongside dnaPortAuthVlansFirst2K to control authentication requirements across the full VLAN range on a trunk port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.4 snmpwalk -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortAuthVlansSecond2K
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.4.1 snmpget -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaPortAuthVlansSecond2K.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.151.1.2.2.1.4.1 s <value>
Start monitoring D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-NETWORK-ACCESS-MIB::dnaPortAuthVlansSecond2K OID value, configure state conditions and alerts, and monitor any D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.26 | dlinkIndustrialCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.26.151 | dlinkSwNetworkAccessAuthMIB | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1 | dNetAccessAuthMIBObjects | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2 | dNetAuthAuthenticator | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2 | dnaPortConfigTable | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2.1 | dnaPortConfigEntry | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.2.2.1.4 | dnaPortAuthVlansSecond2K | DLINKSW-NETWORK-ACCESS-MIB |