All MIBs › DLINKSW-NETWORK-ACCESS-MIB › dnaMacMoveMode
dnaMacMoveMode
Module: DLINKSW-NETWORK-ACCESS-MIB
OID (symbolic): DLINKSW-NETWORK-ACCESS-MIB::dnaMacMoveMode
OID (numeric): 1.3.6.1.4.1.171.26.151.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls whether to allow authenticated hosts to do roaming across different switch ports.
deny : When a host is authenticated on one port, that address is not allowed to move on another authenticated manager-enabled port of the device.
permit: Authenticated hosts are allowed to move from one port to another on the same device. When a host moves to a new port, the authenticated session on the original port is deleted, and the host is re-authenticated on the new port.
What is dnaMacMoveMode?
Controls whether an already-authenticated host can roam to a different switch port without re-authenticating from scratch: deny(1) blocks the move so the address stays pinned to its original port, while permit(2) lets the host move, deleting the old session and forcing a fresh authentication on the new port. An admin sets this to permit(2) in environments with mobile devices that hop between access ports, or deny(1) to catch MAC spoofing attempts across ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.1.1 snmpwalk -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaMacMoveMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.151.1.1.1.1 snmpget -v2c -c public <target> DLINKSW-NETWORK-ACCESS-MIB::dnaMacMoveMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.151.1.1.1.1 i <value>
Start monitoring D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-NETWORK-ACCESS-MIB::dnaMacMoveMode OID value, configure state conditions and alerts, and monitor any D-Link DGS-F3400/DIS-200G-12SW industrial switch (network access authentication sequencing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.26 | dlinkIndustrialCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.26.151 | dlinkSwNetworkAccessAuthMIB | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1 | dNetAccessAuthMIBObjects | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.1 | dNetAuthSystem | DLINKSW-NETWORK-ACCESS-MIB |
| 1.3.6.1.4.1.171.26.151.1.1.1 | dnaMacMoveMode | DLINKSW-NETWORK-ACCESS-MIB |