All MIBs › DLINKPRIME-DEVICE-INFORMATION-MIB › dpDeviceInfoIpV4AddrCfgMode
dpDeviceInfoIpV4AddrCfgMode
Module: DLINKPRIME-DEVICE-INFORMATION-MIB
OID (symbolic): DLINKPRIME-DEVICE-INFORMATION-MIB::dpDeviceInfoIpV4AddrCfgMode
OID (numeric): 1.3.6.1.4.1.171.28.3.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the means by which the default interface in the device gets the IP address.
If 'manual' mode is selected, the default interface takes the 'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address through dynamic IP address configuration protocols such as RARP client, BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the above protocols, the default interface uses the 'sysDefaultIpAddr' configured in the system.
What is dpDeviceInfoIpV4AddrCfgMode?
This read-write setting selects how the device's default network interface obtains its IPv4 address: manual, dhcp, or bootp. Choosing manual makes the interface use the fixed sysDefaultIpAddr configured on the box, while dhcp or bootp lets it acquire an address dynamically, falling back to the manual address if none of those protocols succeed. For example, setting it to dhcp(2) lets the device pull its address from a DHCP server on first boot, keeping the configured static address in reserve if the DHCP request times out.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.28.3.1.1.1 snmpwalk -v2c -c public <target> DLINKPRIME-DEVICE-INFORMATION-MIB::dpDeviceInfoIpV4AddrCfgMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.28.3.1.1.1.1 snmpget -v2c -c public <target> DLINKPRIME-DEVICE-INFORMATION-MIB::dpDeviceInfoIpV4AddrCfgMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.28.3.1.1.1.1 i <value>
Start monitoring D-Link Prime ecosystem device (identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKPRIME-DEVICE-INFORMATION-MIB::dpDeviceInfoIpV4AddrCfgMode OID value, configure state conditions and alerts, and monitor any D-Link Prime ecosystem device (identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.28 | dlinkPrimeCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.28.3 | dlinkPrimeDeviceInfoMIB | DLINKPRIME-DEVICE-INFORMATION-MIB |
| 1.3.6.1.4.1.171.28.3.1 | dpDeviceInfoMIBObjects | DLINKPRIME-DEVICE-INFORMATION-MIB |
| 1.3.6.1.4.1.171.28.3.1.1 | dpDeviceInfoSysConfiguration | DLINKPRIME-DEVICE-INFORMATION-MIB |
| 1.3.6.1.4.1.171.28.3.1.1.1 | dpDeviceInfoIpV4AddrCfgMode | DLINKPRIME-DEVICE-INFORMATION-MIB |