DLINK-3100-MNGINF-MIB

All MIBs › DLINK-3100-MNGINF-MIB

Organization: Dlink, Inc.

Last Updated: 2003-09-21

Category: Vendor: D-Link

Description: Provides management interface configuration and status objects for D-Link 3100 series switch management access.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-MNGINF-MIB?

This is a D-Link private MIB for the DES-3100 series switch family, managing the switch's management interface access control—defining which IP addresses, services, and priorities are permitted to reach the switch's management functions. It exposes a management access list table specifying entries by priority, associated interface index, allowed IP address/netmask, permitted service (e.g., Telnet, SNMP, HTTP), and action (permit/deny), along with the currently active list name and overall management-interface enable state. Its monitoring value is around management-plane security configuration—confirming which management access rules are active and enforced, and catching cases where the management interface access control is disabled or misconfigured, potentially exposing the switch to unauthorized management access—rather than hardware health telemetry. It is a vendor-private MIB specific to D-Link's management-access-control feature set with no clear dependency on external standard MIBs from the objects shown. It would be deployed on D-Link DES-3100 series switches in small-to-midsize enterprise or SMB network environments. Engineers can download the DLINK-3100-MNGINF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-MNGINF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-3100 series switch

Monitoring Examples

An operator would check rlMngInfEnable and rlMngInfActiveListName to confirm management access control is enabled and identify which named list is currently enforced, then walk rlMngInfListTable (keyed by rlMngInfListName and rlMngInfListPriority) to verify each entry's rlMngInfListIpAddr/rlMngInfListIpNetMask, rlMngInfListService, and rlMngInfListAction match intended security policy. An unexpected permit entry for a broad IP range and a sensitive service like Telnet would indicate a management-access misconfiguration that could expose the switch to unauthorized administrative access. rlMngInfListIfIndex confirms which interface a given rule is scoped to.

What Can Be Monitored

management access control enable state
active management access list
permitted IP/netmask per rule
permitted service and action per rule

Imported Objects

From DLINK-3100-MIB

rnd	MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlMngInf	1.3.6.1.4.1.171.10.94.89.89.89			The private MIB module definition for management access control.
INT rlMngInfMibVersion	1.3.6.1.4.1.171.10.94.89.89.89.1	INTEGER	read-only	MIB's version, the current version is 1.
T/F rlMngInfEnable	1.3.6.1.4.1.171.10.94.89.89.89.2	TruthValue	read-write	The variable specifies if Management ACL functionality is enabled.
STR rlMngInfActiveListName	1.3.6.1.4.1.171.10.94.89.89.89.3	DisplayString	read-write	The currently activated Management ACL name
rlMngInfListTable	1.3.6.1.4.1.171.10.94.89.89.89.4		not-accessible	The table specifies all defined Access Lists definitions for IPv4 addresses. Provide backward compatibility for previous versions.
rlMngInfListEntry	1.3.6.1.4.1.171.10.94.89.89.89.4.1		not-accessible	Row definition for this table.
STR rlMngInfListName	1.3.6.1.4.1.171.10.94.89.89.89.4.1.1	DisplayString	read-only	The Name of the Access List.
U32 rlMngInfListPriority	1.3.6.1.4.1.171.10.94.89.89.89.4.1.2	Unsigned32	read-only	The Priority value.
U32 rlMngInfListIfIndex	1.3.6.1.4.1.171.10.94.89.89.89.4.1.3	Unsigned32	read-write	The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
IP rlMngInfListIpAddr	1.3.6.1.4.1.171.10.94.89.89.89.4.1.4	IpAddress	read-write	The IP address. The IP address can be configured to be 0, which means don't care value.
IP rlMngInfListIpNetMask	1.3.6.1.4.1.171.10.94.89.89.89.4.1.5	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
RLM rlMngInfListService	1.3.6.1.4.1.171.10.94.89.89.89.4.1.6	RlMngInfServiceType	read-write	Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RLM rlMngInfListAction	1.3.6.1.4.1.171.10.94.89.89.89.4.1.7	RlMngInfActionType	read-write	Action type. Can be permit or deny.
ROW rlMngInfListRowStatus	1.3.6.1.4.1.171.10.94.89.89.89.4.1.8	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
T/F rlMngInfAuditingEnable	1.3.6.1.4.1.171.10.94.89.89.89.5	TruthValue	read-write	Controls whether SysLog messages should be issued on reject by rule
rlMngInfListInetTable	1.3.6.1.4.1.171.10.94.89.89.89.6		not-accessible	The table specifies all defined Access Lists definitions definitions for both IPv4 and IPv6 addresses.
rlMngInfListInetEntry	1.3.6.1.4.1.171.10.94.89.89.89.6.1		not-accessible	Row definition for this table.
STR rlMngInfListInetName	1.3.6.1.4.1.171.10.94.89.89.89.6.1.1	DisplayString	read-only	The Name of the Access List.
U32 rlMngInfListInetPriority	1.3.6.1.4.1.171.10.94.89.89.89.6.1.2	Unsigned32	read-only	The Priority value.
U32 rlMngInfListInetIfIndex	1.3.6.1.4.1.171.10.94.89.89.89.6.1.3	Unsigned32	read-write	The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
IPt rlMngInfListInetIpAddrType	1.3.6.1.4.1.171.10.94.89.89.89.6.1.4	InetAddressType	read-write	The Inet address type.
IP rlMngInfListInetIpAddr	1.3.6.1.4.1.171.10.94.89.89.89.6.1.5	InetAddress	read-write	The Inet address.Used for both IPv4 and IPv6 addresses. The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , which means ignored value.
IP rlMngInfListInetIpNetMask	1.3.6.1.4.1.171.10.94.89.89.89.6.1.6	IpAddress	read-write	This field will used in case of IPv4 addresses . For IPv6 this field ignored. Default value 255.255.255.255.
RLM rlMngInfListInetService	1.3.6.1.4.1.171.10.94.89.89.89.6.1.7	RlMngInfServiceType	read-write	Service type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RLM rlMngInfListInetAction	1.3.6.1.4.1.171.10.94.89.89.89.6.1.8	RlMngInfActionType	read-write	Action type. Can be permit or deny.
ROW rlMngInfListInetRowStatus	1.3.6.1.4.1.171.10.94.89.89.89.6.1.9	RowStatus	read-write	The row status variable, used according to row installation and removal conventions.
INT rlMngInfListInetIPv6PrefixLength	1.3.6.1.4.1.171.10.94.89.89.89.6.1.10	INTEGER	read-write	IPv6 prefix length.This field provide IPv6 prefix length (mask) for IPv6 only.In case of IPv4 this field will ignored

RFC description

Controls management interface access lists for D-Link DES-3100 switch series.

Start monitoring D-Link DES-3100 series switch (management access control) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-MNGINF-MIB

What Is DLINK-3100-MNGINF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description