DLINK-3100-AAA

All MIBs › DLINK-3100-AAA

Organization: Dlink, Inc.

Last Updated: 2003-09-21

Category: Domain: Security, Vendor: D-Link

Description: D-Link 3100 AAA MIB providing authentication, authorization, and accounting configuration and status management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-AAA?

DLINK-3100-AAA is a D-Link private MIB for the DGS/DES-3100 series managed switches, covering Authentication, Authorization, and Accounting (AAA) configuration for device management access. It exposes configuration objects controlling which authentication methods are enabled (RADIUS, TACACS+, local user database, system or line password), retry counts, and TACACS+-specific settings. As a configuration/security-status module, it lets an administrator verify the software configuration governing who can log into the switch and by what method, which is critical for confirming that management access is locked down as intended rather than left in an insecure fallback mode. It is a vendor-private MIB that parallels concepts from the standard RADIUS/TACACS+ protocols but does not appear to import a standard IETF AAA MIB directly. It is typically deployed by network administrators managing centralized authentication for a fleet of D-Link 3100-series access switches. Network engineers evaluating or troubleshooting this functionality can download the DLINK-3100-AAA file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-AAA. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-3100/DGS-3100 series managed switch

Monitoring Examples

An operator would check rlAAARadiusEnabled, rlAAATacacsEnabled, and rlAAALocalUserEnabled to confirm which authentication backends are active, along with rlAAARetries for the login retry limit. The rlAAAAlwaysSuccessEnabled flag is particularly worth monitoring, since if left enabled it would mean the switch grants access regardless of credential validity -- a serious security misconfiguration. Checking rlAAASystemPasswordEnabled versus rlAAALinePasswordEnabled clarifies whether the switch is relying on a shared system password or per-line passwords for fallback authentication.

What Can Be Monitored

AAA method enabled status (RADIUS/TACACS+/local)
authentication retry count
system/line password authentication mode
always-success authentication flag

Imported Objects

From DLINK-3100-MIB

rlAAAEap	OBJECT-IDENTITY
rlRadius	OBJECT-IDENTITY
rnd	MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressType

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using rlAAALineConsFailedLogins OID:

Select a D-Link DES-3100/DGS-3100 series managed switch (AAA) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rlAAALineConsFailedLogins into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of last consecutive failed logins. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlAAA	1.3.6.1.4.1.171.10.94.89.89.79			The private MIB module definition for Authentication, Authorization and Accounting in DLINK-3100 devices.
INT rlAAAMibVersion	1.3.6.1.4.1.171.10.94.89.89.79.1	INTEGER	read-only	MIB's version, the current version is 2. The difference in RlAAALocalLoginHistEntry, RlAAALinePassLoginHistEntry, RlAAASystemLoginHistEntry added mrid field.
INT rlAAARetries	1.3.6.1.4.1.171.10.94.89.89.79.2	INTEGER	read-write	Determines the number of retries for each method (Radius, local passwords, local users table and tacacs).
T/F rlAAARadiusEnabled	1.3.6.1.4.1.171.10.94.89.89.79.3	TruthValue	read-write	Specifies whether AAA will use Radius. When to use Radius exactly depends on its position in the methods list.
T/F rlAAATacacsEnabled	1.3.6.1.4.1.171.10.94.89.89.79.4	TruthValue	read-write	Specifies whether AAA will use Tacacs. When to use Tacacs exactly depends on its position in the methods list.
T/F rlAAALocalUserEnabled	1.3.6.1.4.1.171.10.94.89.89.79.5	TruthValue	read-write	Specifies whether AAA will use the local users table. When to use the table exactly depends on its position in the methods list.
T/F rlAAASystemPasswordEnabled	1.3.6.1.4.1.171.10.94.89.89.79.6	TruthValue	read-write	Specifies whether AAA will use the system password. When to use the passwords exactly depends on its position in the methods list.
T/F rlAAALinePasswordEnabled	1.3.6.1.4.1.171.10.94.89.89.79.7	TruthValue	read-write	Specifies whether AAA will use the line password. When to use the passwords exactly depends on its position in the methods list.
T/F rlAAAAlwaysSuccessEnabled	1.3.6.1.4.1.171.10.94.89.89.79.8	TruthValue	read-write	Specifies whether AAA will use the always success method. When to use that method exactly depends on its position in the methods list.
T/F rlAAARadiusSupported	1.3.6.1.4.1.171.10.94.89.89.79.9	TruthValue	read-only	This mib show whether Radius is supported in AAA. If the value is false Radius will not be used as an authentication and accounting method. If the value is true Radius will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
T/F rlAAATacacsSupported	1.3.6.1.4.1.171.10.94.89.89.79.10	TruthValue	read-only	This mib show whether Tacacs+ is supported in AAA. If the value is false Tacacs+ will not be used as an authentication and accounting method. If the value is true Tacacs+ will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
T/F rlAAALocalUserSupported	1.3.6.1.4.1.171.10.94.89.89.79.11	TruthValue	read-only	This mib show whether the local users db is supported in AAA.If the value is false the local users db will not be used as an authentication and accounting method. If the value is true the local users db will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
T/F rlAAASystemPasswordSupported	1.3.6.1.4.1.171.10.94.89.89.79.12	TruthValue	read-only	This mib show whether system password is supported in AAA. If the value is false system password will not be used as an authentication and accounting method. If the value is true the system password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
T/F rlAAALinePasswordSupported	1.3.6.1.4.1.171.10.94.89.89.79.13	TruthValue	read-only	This mib show whether line password is supported in AAA. If the value is false line password will not be used as an authentication and accounting method. If the value is true the line password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
T/F rlAAALineAlwaysSuccessSupported	1.3.6.1.4.1.171.10.94.89.89.79.14	TruthValue	read-only	This mib show whether line always success method is supported in AAA.If the value is false always success method will not be used as an authentication and accounting method. If the value is true the always success method will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
rlAAAMethodListTable	1.3.6.1.4.1.171.10.94.89.89.79.15		not-accessible	The table specifies all methods list per method name.
rlAAAMethodListEntry	1.3.6.1.4.1.171.10.94.89.89.79.15.1		not-accessible	The row definition for this table.
STR rlAAAMethodListName	1.3.6.1.4.1.171.10.94.89.89.79.15.1.1	DisplayString	read-write	Line Method List Name
RLA rlAAAMethodType1	1.3.6.1.4.1.171.10.94.89.89.79.15.1.2	RlAAAMethodtype	read-write	first method type that will be used in the method linked list.
RLA rlAAAMethodType2	1.3.6.1.4.1.171.10.94.89.89.79.15.1.3	RlAAAMethodtype	read-write	second method type that will be used in the method linked list.
RLA rlAAAMethodType3	1.3.6.1.4.1.171.10.94.89.89.79.15.1.4	RlAAAMethodtype	read-write	3th method type that will be used in the method linked list.
RLA rlAAAMethodType4	1.3.6.1.4.1.171.10.94.89.89.79.15.1.5	RlAAAMethodtype	read-write	4th method type that will be used in the method linked list.
RLA rlAAAMethodType5	1.3.6.1.4.1.171.10.94.89.89.79.15.1.6	RlAAAMethodtype	read-write	5th method type that will be used in the method linked list.
RLA rlAAAMethodType6	1.3.6.1.4.1.171.10.94.89.89.79.15.1.7	RlAAAMethodtype	read-write	6th method type that will be used in the method linked list.
RLA rlAAAMethodType7	1.3.6.1.4.1.171.10.94.89.89.79.15.1.8	RlAAAMethodtype	read-write	7th method type that will be used in the method linked list.
ROW rlAAAMethodListStatus	1.3.6.1.4.1.171.10.94.89.89.79.15.1.9	RowStatus	read-write	method list status can be destroy or createAndGo
rlAAALineTable	1.3.6.1.4.1.171.10.94.89.89.79.16		not-accessible	The table specifies all lines, their passwords and their authorizations level .the table ordered lexicography by the line name. when a new line is being authenticate the search in line table is from the first entry in table till it find the first entry that fit application input line parameters .
rlAAALineEntry	1.3.6.1.4.1.171.10.94.89.89.79.16.1		not-accessible	The row definition for this table.
RLA rlAAALinePortType	1.3.6.1.4.1.171.10.94.89.89.79.16.1.1	RlAAALinePortType	read-write	the physical port type .
U32 rlAAAIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.16.1.2	Unsigned32	read-write	Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
RLA rlAAAServiceType	1.3.6.1.4.1.171.10.94.89.89.79.16.1.3	RlAAAServiceType	read-write	the service type
STR rlAAALineMethodListNameLevel1	1.3.6.1.4.1.171.10.94.89.89.79.16.1.4	DisplayString	read-write	Method list Name for level 1 .That name points to the method list table .It is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel2	1.3.6.1.4.1.171.10.94.89.89.79.16.1.5	DisplayString	read-write	Method list Name for level 2 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel3	1.3.6.1.4.1.171.10.94.89.89.79.16.1.6	DisplayString	read-write	Method list Name for level 3 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
STR rlAAALineMethodListNameLevel4	1.3.6.1.4.1.171.10.94.89.89.79.16.1.7	DisplayString	read-write	Method list Name for level 4-that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
STR rlAAALineMethodListNameLevel5	1.3.6.1.4.1.171.10.94.89.89.79.16.1.8	DisplayString	read-write	Method list Name for level 5 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel6	1.3.6.1.4.1.171.10.94.89.89.79.16.1.9	DisplayString	read-write	Method list Name for level 6 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel7	1.3.6.1.4.1.171.10.94.89.89.79.16.1.10	DisplayString	read-write	Method list Name for level 7 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel8	1.3.6.1.4.1.171.10.94.89.89.79.16.1.11	DisplayString	read-write	Method list Name for level 8 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel9	1.3.6.1.4.1.171.10.94.89.89.79.16.1.12	DisplayString	read-write	Method list Name for level 9 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel10	1.3.6.1.4.1.171.10.94.89.89.79.16.1.13	DisplayString	read-write	Method list Name for level 10 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel11	1.3.6.1.4.1.171.10.94.89.89.79.16.1.14	DisplayString	read-write	Method list Name for level 11 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel12	1.3.6.1.4.1.171.10.94.89.89.79.16.1.15	DisplayString	read-write	Method list Name for level 12 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel13	1.3.6.1.4.1.171.10.94.89.89.79.16.1.16	DisplayString	read-write	Method list Name for level 13 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel14	1.3.6.1.4.1.171.10.94.89.89.79.16.1.17	DisplayString	read-write	Method list Name for level 14 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALineMethodListNameLevel15	1.3.6.1.4.1.171.10.94.89.89.79.16.1.18	DisplayString	read-write	Method list Name for level 15 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
STR rlAAALinePassword	1.3.6.1.4.1.171.10.94.89.89.79.16.1.19	DisplayString	read-write	Line Password. Zero length password is considered as no password. Password with zero length means that in case this password is the method to be used a method fail is returned and no other method is being used. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
ROW rlAAALineStatus	1.3.6.1.4.1.171.10.94.89.89.79.16.1.20	RowStatus	read-write	Line status can be destroy or createAndGo
INT rlAAALineLockedState	1.3.6.1.4.1.171.10.94.89.89.79.16.1.21	INTEGER	read-only	Line locked status
C32 rlAAALineConsFailedLoginsEx	1.3.6.1.4.1.171.10.94.89.89.79.16.1.22	Counter32	read-only	Number of last consecutive failed logins
U32 rlAAALinePasswordValidTime	1.3.6.1.4.1.171.10.94.89.89.79.16.1.23	Unsigned32	read-write	The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
STR rlAAALinePasswordExpieryDate	1.3.6.1.4.1.171.10.94.89.89.79.16.1.24	DisplayString	read-only	If Line password aging is active, the date on which The current password will expire. Otherwise zero size string
rlAAALocalUserTable	1.3.6.1.4.1.171.10.94.89.89.79.17		not-accessible	The table specifies all usernames, their passwords and their authorizations.
rlAAALocalUserEntry	1.3.6.1.4.1.171.10.94.89.89.79.17.1		not-accessible	The row definition for this table.
STR rlAAALocalUserName	1.3.6.1.4.1.171.10.94.89.89.79.17.1.1	DisplayString	read-write	Local User Name
STR rlAAALocalUserPassword	1.3.6.1.4.1.171.10.94.89.89.79.17.1.2	DisplayString	read-write	Local User Password .The password can be null allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
INT rlAAALocalUserPrivilage	1.3.6.1.4.1.171.10.94.89.89.79.17.1.3	INTEGER	read-write	Local User Privilage
ROW rlAAALocalHostStatus	1.3.6.1.4.1.171.10.94.89.89.79.17.1.4	RowStatus	read-write	Local User status
INT rlAAALocalLockedState	1.3.6.1.4.1.171.10.94.89.89.79.17.1.5	INTEGER	read-only	Local User locked status
C32 rlAAALocalConsFailedLogins	1.3.6.1.4.1.171.10.94.89.89.79.17.1.6	Counter32	read-only	Number of last consecutive failed logins
U32 rlAAALocalPasswordValidTime	1.3.6.1.4.1.171.10.94.89.89.79.17.1.7	Unsigned32	read-write	The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
STR rlAAALocalPasswordExpieryDate	1.3.6.1.4.1.171.10.94.89.89.79.17.1.8	DisplayString	read-only	If User password aging is active, the date on which The current password will expire. Otherwise zero size string
STR rlAAASystemPasswordlevel1	1.3.6.1.4.1.171.10.94.89.89.79.18	DisplayString	read-write	system Password for level 1. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel2	1.3.6.1.4.1.171.10.94.89.89.79.19	DisplayString	read-write	system Password for level 2 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel3	1.3.6.1.4.1.171.10.94.89.89.79.20	DisplayString	read-write	system Password for level 3 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel4	1.3.6.1.4.1.171.10.94.89.89.79.21	DisplayString	read-write	system Password for level 4 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel5	1.3.6.1.4.1.171.10.94.89.89.79.22	DisplayString	read-write	system Password for level 5 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel6	1.3.6.1.4.1.171.10.94.89.89.79.23	DisplayString	read-write	system Password for level 6 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel7	1.3.6.1.4.1.171.10.94.89.89.79.24	DisplayString	read-write	system Password for level 7 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel8	1.3.6.1.4.1.171.10.94.89.89.79.25	DisplayString	read-write	system Password for level 8 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel9	1.3.6.1.4.1.171.10.94.89.89.79.26	DisplayString	read-write	system Password for level 9 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel10	1.3.6.1.4.1.171.10.94.89.89.79.27	DisplayString	read-write	system Password for level 10 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel11	1.3.6.1.4.1.171.10.94.89.89.79.28	DisplayString	read-write	system Password for level 11 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel12	1.3.6.1.4.1.171.10.94.89.89.79.29	DisplayString	read-write	system Password for level 12 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel13	1.3.6.1.4.1.171.10.94.89.89.79.30	DisplayString	read-write	system Password for level 13 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel14	1.3.6.1.4.1.171.10.94.89.89.79.31	DisplayString	read-write	system Password for level 14 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
STR rlAAASystemPasswordlevel15	1.3.6.1.4.1.171.10.94.89.89.79.32	DisplayString	read-write	system Password for level 15 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not part of it
rlAAAUserTable	1.3.6.1.4.1.171.10.94.89.89.79.33		not-accessible	The table holds all current users that have been authenticated.
rlAAAUserEntry	1.3.6.1.4.1.171.10.94.89.89.79.33.1		not-accessible	The row definition for this table.
U32 rlAAAUserIndex	1.3.6.1.4.1.171.10.94.89.89.79.33.1.1	Unsigned32	not-accessible	User Index
RLA rlAAAUserServiceType	1.3.6.1.4.1.171.10.94.89.89.79.33.1.2	RlAAAServiceType	read-only	The service that the user uses. Service dont care is console terminal.
IP rlAAAUserRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.33.1.3	IpAddress	read-only	User remote IP address.
STR rlAAAUserName	1.3.6.1.4.1.171.10.94.89.89.79.33.1.4	DisplayString	read-only	User Name
U32 rlAAAUserLevel	1.3.6.1.4.1.171.10.94.89.89.79.33.1.5	Unsigned32	read-only	User level
U32 rlAAAUserIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.33.1.6	Unsigned32	read-only	User if index.
DAT rlAAAUserLoginDate	1.3.6.1.4.1.171.10.94.89.89.79.33.1.7	DateAndTime	read-only	Date of use creation.
U32 rlAAAUserLoginDurationMS	1.3.6.1.4.1.171.10.94.89.89.79.33.1.8	Unsigned32	read-only	Time in MS since user login.
rlAAATest	1.3.6.1.4.1.171.10.94.89.89.79.34
INT rlAAATestPassword	1.3.6.1.4.1.171.10.94.89.89.79.34.1	INTEGER	read-write	This variable enables the user supplying the correct code to use the AAA test feature.
rlAAATestUserTable	1.3.6.1.4.1.171.10.94.89.89.79.34.2		not-accessible	This table enables a user to perform a simulation of authentiction.
rlAAATestUserEntry	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1		not-accessible	The row definition for this table.
U32 rlAAATestUserIndex	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.1	Unsigned32	read-write	User entry index (the number is used just to identify the user).
RLA rlAAATestPortType	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.2	RlAAALinePortType	read-write	the physical port type .
INT rlAAATestIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.3	INTEGER	read-write	line ifIndex can configue to be zero witch means Don't-care value
RLA rlAAATestServiceType	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.4	RlAAAServiceType	read-write	the service type
INT rlAAATestUserAuthenticationStatus	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.5	INTEGER	read-only	Shows the ststus of the operation and what is expected from the 'user'.
INT rlAAATestUserAuthenticationAction	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.6	INTEGER	read-write	By setting this field the process moves from one state to another. On creation the value must be begin. When the value of rlAAATestUserAuthenticationStatus is needPassword the value can be set to receivePassword or abort. When the value of rlAAATestUserAuthenticationStatus is needUsername the value can be set to receiveUsername or abort. When the value of rlAAATestUserAuthenticationStatus is success or failure the value can be set to delete or abort. When the value of rlAAATestUserAuthenticationStatus is aborted the value can be set to delete. When the value of rlAAATestUserAuthenticationStatus is deleted the value can not be set to any value. When the value of rlAAATestUserAuthenticationStatus is waiting the value can be set or abort.
STR rlAAATestUserInput	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.7	DisplayString	read-write	If the acion was set to receivePassword than this field should hold the value of the password. If the action was set to receiveUsername than this field should hold the value of the username.
ROW rlAAATestUserStatus	1.3.6.1.4.1.171.10.94.89.89.79.34.2.1.8	RowStatus	read-write	Entry status. The entry can not be deleted. It will be deleted if unchanged more than 2 minutes.
rlTacacs	1.3.6.1.4.1.171.10.94.89.89.79.40
INT rlTacacsMibVersion	1.3.6.1.4.1.171.10.94.89.89.79.40.1	INTEGER	read-only	MIB's version, the current version is 1.
INT rlTacacsGlobalDefaultTimeout	1.3.6.1.4.1.171.10.94.89.89.79.40.2	INTEGER	read-write	The maximum time (in seconds) to wait for TACACS+ server to reply. This MIB is used if the value of the field rlTacacsServerTimeout is 0.
STR rlTacacsGlobalDefaultKey	1.3.6.1.4.1.171.10.94.89.89.79.40.3	DisplayString	read-write	Secret key to be shared with TACACS+ server. This MIB is used if the value of the field rlTacacsServerUseGlobalDefaultKey is false.
IP rlTacacsGlobalDefaultSourceIpInterface	1.3.6.1.4.1.171.10.94.89.89.79.40.6	IpAddress	read-write	IP address of the interface to use with TACACS+ server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerSource is 255.255.255.255.
rlTacacsServerTable	1.3.6.1.4.1.171.10.94.89.89.79.40.7		not-accessible	The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret.
rlTacacsServerEntry	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1		not-accessible	An entry (conceptual row) representing a TACACS+ server with which the client shares a secret.
IP rlTacacsServerAddress	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.1	IpAddress	read-write	The IP address of the TACACS+ server referred to in this table entry.
INT rlTacacsServerPortNumber	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.2	INTEGER	read-write	The TCP port the client establishes connections with this server.
RLT rlTacacsServerConnectionType	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.3	RlTacacsConnectionType	read-write	Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection).
RLT rlTacacsServerConnectionStatus	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.4	RlTacacsConnectionStatus	read-only	Specifies status TCP connection type between device and TACACS+ server.
INT rlTacacsServerTimeout	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.5	INTEGER	read-write	The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.
T/F rlTacacsServerUseGlobalDefaultKey	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.6	TruthValue	read-write	If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used.
STR rlTacacsServerKey	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.7	DisplayString	read-write	Secret key to be shared with this TACACS+ server.
IP rlTacacsServerSourceIpInterface	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.8	IpAddress	read-write	IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlTacacsGlobalDefaultSource will be used.
INT rlTacacsServerPriority	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.9	INTEGER	read-write	Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
ROW rlTacacsServerRowStatus	1.3.6.1.4.1.171.10.94.89.89.79.40.7.1.10	RowStatus	read-write
T/F rlAAAAuditingEnable	1.3.6.1.4.1.171.10.94.89.89.79.41	TruthValue	read-write	Controls whether SysLog messages should be issued on login events
INT rlAAAMinPasswordLength	1.3.6.1.4.1.171.10.94.89.89.79.42	INTEGER	read-write	The minimum length of password for local user authentication defined in field rlAAALocalUserPassword in rlAAALocalUserTable. The value applies only to new or updated user passwords. In actual implementation the range may be reduced to (0 \| N-64), where N is a platform dependent (for TIC compatibility N=8)
U32 rlAAAPasswordHistSize	1.3.6.1.4.1.171.10.94.89.89.79.43	Unsigned32	read-write	The number of most recent password, previously defined for Local User Table, Line Table, System Password Table for specific entity. This list used for password reusing prevention. Value of 0 means none. Changing the value does not cause the loss of history. History Max size is product specific.
U32 rlAAAPasswordHistHoldTime	1.3.6.1.4.1.171.10.94.89.89.79.44	Unsigned32	read-write	The time in day, which an old password may be used in password history check. Changing the value does not cause the loss of history.
T/F rlAAASuccLoginWriteToFile	1.3.6.1.4.1.171.10.94.89.89.79.45	TruthValue	read-write	Controls whether successful logins are written to login file
rlAAALocalLoginHistTable	1.3.6.1.4.1.171.10.94.89.89.79.46		not-accessible	The table holds successful login history for all users. This table is read-only.
rlAAALocalLoginHistEntry	1.3.6.1.4.1.171.10.94.89.89.79.46.1		not-accessible	The row definition for this table.
STR rlAAALocalLoginHistName	1.3.6.1.4.1.171.10.94.89.89.79.46.1.1	DisplayString	read-only	User Name
U32 rlAAALocalLoginHistIndex	1.3.6.1.4.1.171.10.94.89.89.79.46.1.2	Unsigned32	not-accessible	Index in History for specific user. Lower number means more recent login.
RLA rlAAALocalLoginHistServiceType	1.3.6.1.4.1.171.10.94.89.89.79.46.1.3	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IP rlAAALocalLoginHistRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.46.1.4	IpAddress	read-only	User remote IP address.
IP rlAAALocalLoginHistLocalIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.46.1.5	IpAddress	read-only	local Ip Address on login.
STR rlAAALocalLoginDateTime	1.3.6.1.4.1.171.10.94.89.89.79.46.1.6	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAALocalLoginMrid	1.3.6.1.4.1.171.10.94.89.89.79.46.1.7	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
rlAAALinePassLoginHistTable	1.3.6.1.4.1.171.10.94.89.89.79.47		not-accessible	The table holds successful login history for Line passwords. This table is read-only.
rlAAALinePassLoginHistEntry	1.3.6.1.4.1.171.10.94.89.89.79.47.1		not-accessible	The row definition for this table.
RLA rlAAALinePassLoginHistPortType	1.3.6.1.4.1.171.10.94.89.89.79.47.1.1	RlAAALinePortType	read-write	the physical port type.
U32 rlAAALinePassLoginHistIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.47.1.2	Unsigned32	read-write	Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
RLA rlAAALinePassLoginHistServiceType	1.3.6.1.4.1.171.10.94.89.89.79.47.1.3	RlAAAServiceType	read-write	the service type
U32 rlAAALinePassLoginHistIndex	1.3.6.1.4.1.171.10.94.89.89.79.47.1.4	Unsigned32	not-accessible	Index in History for specific user. Lower number means more recent login.
RLA rlAAALinePassLoginHistActServiceType	1.3.6.1.4.1.171.10.94.89.89.79.47.1.5	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IP rlAAALinePassLoginHistRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.47.1.6	IpAddress	read-only	User remote IP address.
IP rlAAALinePassLoginHistLocalIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.47.1.7	IpAddress	read-only	local Ip Address on login.
STR rlAAALinePassLoginDateTime	1.3.6.1.4.1.171.10.94.89.89.79.47.1.8	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAALinePassLoginMrid	1.3.6.1.4.1.171.10.94.89.89.79.47.1.9	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
rlAAASystemLoginHistTable	1.3.6.1.4.1.171.10.94.89.89.79.48		not-accessible	The table holds successful login history for system passwords. This table is read-only.
rlAAASystemLoginHistEntry	1.3.6.1.4.1.171.10.94.89.89.79.48.1		not-accessible	The row definition for this table.
INT rlAAASystemLoginHistLevel	1.3.6.1.4.1.171.10.94.89.89.79.48.1.1	INTEGER	read-only	User Name
U32 rlAAASystemLoginHistIndex	1.3.6.1.4.1.171.10.94.89.89.79.48.1.2	Unsigned32	not-accessible	Index in History for specific user. Lower number means more recent login.
RLA rlAAASystemLoginHistServiceType	1.3.6.1.4.1.171.10.94.89.89.79.48.1.3	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IP rlAAASystemLoginHistRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.48.1.4	IpAddress	read-only	User remote IP address.
IP rlAAASystemLoginHistLocalIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.48.1.5	IpAddress	read-only	local Ip Address on login.
STR rlAAASystemLoginDateTime	1.3.6.1.4.1.171.10.94.89.89.79.48.1.6	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAASystemLoginMrid	1.3.6.1.4.1.171.10.94.89.89.79.48.1.7	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
rlAAASysPassStatTable	1.3.6.1.4.1.171.10.94.89.89.79.49		not-accessible	The table specifies all system password and their security properties: is password locked due to wrong password, when and how it was locked or last unsuccessful login information, expiry date of the password.
rlAAASysPassStatEntry	1.3.6.1.4.1.171.10.94.89.89.79.49.1		not-accessible	The row definition for this table.
INT rlAAASysPassStatLevel	1.3.6.1.4.1.171.10.94.89.89.79.49.1.1	INTEGER	read-only	System password level
INT rlAAASysPassStatLockedState	1.3.6.1.4.1.171.10.94.89.89.79.49.1.2	INTEGER	read-only	System password locked status
C32 rlAAASysPassStatConsFailedLogins	1.3.6.1.4.1.171.10.94.89.89.79.49.1.3	Counter32	read-only	Number of last consecutive failed logins
U32 rlAAASysPassStatPasswordValidTime	1.3.6.1.4.1.171.10.94.89.89.79.49.1.4	Unsigned32	read-write	The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
STR rlAAASysPassStatPasswordExpieryDate	1.3.6.1.4.1.171.10.94.89.89.79.49.1.5	DisplayString	read-only	If System password aging is active, the date, on which the current password will expire. Otherwise zero size string
INT rlAAAMaxNumLogAttmpts	1.3.6.1.4.1.171.10.94.89.89.79.50	INTEGER	read-write	The number of consecutive unsuccessful login attempts before user is locked. Value of 0 means no limit. The actual range is product specific. TIC requirement is 3.
STR rlAAAUnlockUserName	1.3.6.1.4.1.171.10.94.89.89.79.51	DisplayString	read-write	An action MIB variable setting with value of Local User Name will unlock this user. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero length display string.
INT rlAAAUnlockSystemPassword	1.3.6.1.4.1.171.10.94.89.89.79.52	INTEGER	read-write	An action MIB variable setting with value of Level will unlock the system password for this level. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero. Zero (0) does no action.
rlAAALockedLineTable	1.3.6.1.4.1.171.10.94.89.89.79.53		not-accessible	The table specifies lines statuses. Users cannot access the product from remote based on a password of the locked line. This table enables to unlock lines.
rlAAALockedLineEntry	1.3.6.1.4.1.171.10.94.89.89.79.53.1		not-accessible	The row definition for this table.
RLA rlAAALockedLinePortType	1.3.6.1.4.1.171.10.94.89.89.79.53.1.1	RlAAALinePortType	read-write	the physical port type .
U32 rlAAALockedLineIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.53.1.2	Unsigned32	read-write	Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
RLA rlAAALockedLineServiceType	1.3.6.1.4.1.171.10.94.89.89.79.53.1.3	RlAAAServiceType	read-write	the service type
INT rlAAALockedLineStatus	1.3.6.1.4.1.171.10.94.89.89.79.53.1.4	INTEGER	read-write	The entry exists only if a line exist. Setting this field to value usable results in resetting the password failure counter, and unlock a locked user.
rlAAASystemPasswordVerificationAndSettingTable	1.3.6.1.4.1.171.10.94.89.89.79.54		not-accessible	The table specifies per every system level, old and new passwords. Serves for verification the old password and setting a new password.
rlAAASystemPasswordVerificationAndSettingEntry	1.3.6.1.4.1.171.10.94.89.89.79.54.1		not-accessible	The row of system password verification and setting table.
INT rlAAASystemPasswordSettingPrivilegeLevel	1.3.6.1.4.1.171.10.94.89.89.79.54.1.1	INTEGER	not-accessible	System password Privelege Level to be set.
STR rlAAASystemPasswordVerificationOldPassword	1.3.6.1.4.1.171.10.94.89.89.79.54.1.2	DisplayString	read-write	Old system password to be verified.
STR rlAAASystemPasswordSettingNewPassword	1.3.6.1.4.1.171.10.94.89.89.79.54.1.3	DisplayString	read-write	New system password to be set.
STR rlAAASystemPasswordConfirmNewPassword	1.3.6.1.4.1.171.10.94.89.89.79.54.1.4	DisplayString	read-write	New system password to be confirmed.
RLA rlAAAAccountingMngMethod	1.3.6.1.4.1.171.10.94.89.89.79.55	RlAAAAccountingMethod	read-write	Method, used for accounting of management sessions, none denotes Accounting is disabled.
RLA rlAAAAccountingDot1xMethod	1.3.6.1.4.1.171.10.94.89.89.79.56	RlAAAAccountingMethod	read-write	Method, used for accounting of 802.1x sessions, none denotes Accounting is disabled.
rlAAAUserInetTable	1.3.6.1.4.1.171.10.94.89.89.79.57		not-accessible	The table holds all current users that have been authenticated. it coexist with rlAAAUserTable to support IPv4 and IPv6
rlAAAUserInetEntry	1.3.6.1.4.1.171.10.94.89.89.79.57.1		not-accessible	The row definition for this table.
U32 rlAAAUserInetIndex	1.3.6.1.4.1.171.10.94.89.89.79.57.1.1	Unsigned32	not-accessible	User Index
RLA rlAAAUserInetServiceType	1.3.6.1.4.1.171.10.94.89.89.79.57.1.2	RlAAAServiceType	read-only	The service that the user uses. Service dont care is console terminal.
IPt rlAAAUserInetRemoteIpAddressType	1.3.6.1.4.1.171.10.94.89.89.79.57.1.3	InetAddressType	read-only	User remote INET address Type.
IP rlAAAUserInetRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.57.1.4	InetAddress	read-only	User remote INET address.
STR rlAAAUserInetName	1.3.6.1.4.1.171.10.94.89.89.79.57.1.5	DisplayString	read-only	User Name
U32 rlAAAUserInetLevel	1.3.6.1.4.1.171.10.94.89.89.79.57.1.6	Unsigned32	read-only	User level
U32 rlAAAUserInetIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.57.1.7	Unsigned32	read-only	User if index.
DAT rlAAAUserInetLoginDate	1.3.6.1.4.1.171.10.94.89.89.79.57.1.8	DateAndTime	read-only	Date of use creation.
U32 rlAAAUserInetLoginDurationMS	1.3.6.1.4.1.171.10.94.89.89.79.57.1.9	Unsigned32	read-only	Time in MS since user login.
rlAAALocalLoginHistInetTable	1.3.6.1.4.1.171.10.94.89.89.79.58		not-accessible	The table holds successful login history for all users. This table is read-only. it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6
rlAAALocalLoginHistInetEntry	1.3.6.1.4.1.171.10.94.89.89.79.58.1		not-accessible	The row definition for this table.
STR rlAAALocalLoginHistInetName	1.3.6.1.4.1.171.10.94.89.89.79.58.1.1	DisplayString	read-only	User Name
U32 rlAAALocalLoginHistInetIndex	1.3.6.1.4.1.171.10.94.89.89.79.58.1.2	Unsigned32	not-accessible	Index in History for specific user. Lower number means more recent login.
RLA rlAAALocalLoginHistInetServiceType	1.3.6.1.4.1.171.10.94.89.89.79.58.1.3	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IPt rlAAALocalLoginHistInetRemoteIpAddressType	1.3.6.1.4.1.171.10.94.89.89.79.58.1.4	InetAddressType	read-only	User remote IP address Type.
IP rlAAALocalLoginHistInetRemoteIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.58.1.5	InetAddress	read-only	User remote IP address.
IPt rlAAALocalLoginHistInetLocalIpAddressType	1.3.6.1.4.1.171.10.94.89.89.79.58.1.6	InetAddressType	read-only	local Ip Address Type on login.
IP rlAAALocalLoginHistInetLocalIpAddress	1.3.6.1.4.1.171.10.94.89.89.79.58.1.7	InetAddress	read-only	local Ip Address on login.
STR rlAAALocalLoginHistInetDateTime	1.3.6.1.4.1.171.10.94.89.89.79.58.1.8	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAALocalLoginHistInetMrid	1.3.6.1.4.1.171.10.94.89.89.79.58.1.9	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
rlAAALinePassLoginHistInetTable	1.3.6.1.4.1.171.10.94.89.89.79.59		not-accessible	The table holds successful login history for Line passwords. This table is read-only. it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6
rlAAALinePassLoginHistInetEntry	1.3.6.1.4.1.171.10.94.89.89.79.59.1		not-accessible	The row definition for this table.
RLA rlAAALinePassLoginHistInetPortType	1.3.6.1.4.1.171.10.94.89.89.79.59.1.1	RlAAALinePortType	read-write	the physical port type.
U32 rlAAALinePassLoginHistInetIfIndex	1.3.6.1.4.1.171.10.94.89.89.79.59.1.2	Unsigned32	read-write	Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
RLA rlAAALinePassLoginHistInetServiceType	1.3.6.1.4.1.171.10.94.89.89.79.59.1.3	RlAAAServiceType	read-write	the service type
U32 rlAAALinePassLoginHistInetIndex	1.3.6.1.4.1.171.10.94.89.89.79.59.1.4	Unsigned32	not-accessible	Index in HistInetory for specific user. Lower number means more recent login.
RLA rlAAALinePassLoginHistInetActServiceType	1.3.6.1.4.1.171.10.94.89.89.79.59.1.5	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IPt rlAAALinePassLoginHistInetRemoteInetAddressType	1.3.6.1.4.1.171.10.94.89.89.79.59.1.6	InetAddressType	read-only	User remote IP address Type.
IP rlAAALinePassLoginHistInetRemoteInetAddress	1.3.6.1.4.1.171.10.94.89.89.79.59.1.7	InetAddress	read-only	User remote IP address.
IPt rlAAALinePassLoginHistInetLocalInetAddressType	1.3.6.1.4.1.171.10.94.89.89.79.59.1.8	InetAddressType	read-only	local Ip Address Type on login.
IP rlAAALinePassLoginHistInetLocalInetAddress	1.3.6.1.4.1.171.10.94.89.89.79.59.1.9	InetAddress	read-only	local Ip Address on login.
STR rlAAALinePassLoginHistInetDateTime	1.3.6.1.4.1.171.10.94.89.89.79.59.1.10	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAALinePassLoginHistInetMrid	1.3.6.1.4.1.171.10.94.89.89.79.59.1.11	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
rlAAASystemLoginHistInetTable	1.3.6.1.4.1.171.10.94.89.89.79.60		not-accessible	The table holds successful login history for system passwords. This table is read-only. it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6
rlAAASystemLoginHistInetEntry	1.3.6.1.4.1.171.10.94.89.89.79.60.1		not-accessible	The row definition for this table.
INT rlAAASystemLoginHistInetLevel	1.3.6.1.4.1.171.10.94.89.89.79.60.1.1	INTEGER	read-only	User Name
U32 rlAAASystemLoginHistInetIndex	1.3.6.1.4.1.171.10.94.89.89.79.60.1.2	Unsigned32	not-accessible	Index in History for specific user. Lower number means more recent login.
RLA rlAAASystemLoginHistInetServiceType	1.3.6.1.4.1.171.10.94.89.89.79.60.1.3	RlAAAServiceType	read-only	The service that the user uses. Service don't care is console terminal.
IPt rlAAASystemLoginHistInetRemoteInetAddressType	1.3.6.1.4.1.171.10.94.89.89.79.60.1.4	InetAddressType	read-only	User remote IP address Type.
IP rlAAASystemLoginHistInetRemoteInetAddress	1.3.6.1.4.1.171.10.94.89.89.79.60.1.5	InetAddress	read-only	User remote IP address.
IPt rlAAASystemLoginHistInetLocalInetAddressType	1.3.6.1.4.1.171.10.94.89.89.79.60.1.6	InetAddressType	read-only	local Ip Address Type on login.
IP rlAAASystemLoginHistInetLocalInetAddress	1.3.6.1.4.1.171.10.94.89.89.79.60.1.7	InetAddress	read-only	local Ip Address on login.
STR rlAAASystemLoginHistInetDateTime	1.3.6.1.4.1.171.10.94.89.89.79.60.1.8	DisplayString	read-only	Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
U32 rlAAASystemLoginHistInetMrid	1.3.6.1.4.1.171.10.94.89.89.79.60.1.9	Unsigned32	read-only	Mrid - indicates to which instance the connection was established
INT rlRadiusMibVersion	1.3.6.1.4.1.171.10.94.89.89.80.1	INTEGER	read-only	MIB's version, the current version is 2. 1 - original version. 2 - field rlRadiusServerUsage was added to rlRadiusServerEntry
INT rlRadiusGlobalDefaultTimeout	1.3.6.1.4.1.171.10.94.89.89.80.2	INTEGER	read-write	The maximum time (in seconds) to wait for this RADIUS server to reply. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultTimeout is false.
INT rlRadiusGlobalDefaultRetries	1.3.6.1.4.1.171.10.94.89.89.80.3	INTEGER	read-write	The number of times to try contacting this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultRetries is false.
INT rlRadiusGlobalDefaultDeadtime	1.3.6.1.4.1.171.10.94.89.89.80.4	INTEGER	read-write	Number of minutes that any RADIUS server is ignored after it has failed. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultDeadtime is false.
STR rlRadiusGlobalDefaultKey	1.3.6.1.4.1.171.10.94.89.89.80.5	DisplayString	read-write	Secret key to be shared with this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultKey is false.
IP rlRadiusGlobalDefaultSource	1.3.6.1.4.1.171.10.94.89.89.80.6	IpAddress	read-write	IPv4 address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultSource is false.
rlRadiusServerTable	1.3.6.1.4.1.171.10.94.89.89.80.7		not-accessible	The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
rlRadiusServerEntry	1.3.6.1.4.1.171.10.94.89.89.80.7.1		not-accessible	An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
IP rlRadiusServerAddress	1.3.6.1.4.1.171.10.94.89.89.80.7.1.1	IpAddress	read-write	The IP address of the RADIUS server referred to in this table entry.
INT rlRadiusServerAuthPortNumber	1.3.6.1.4.1.171.10.94.89.89.80.7.1.2	INTEGER	read-write	The UDP port the client is using to send authentication requests to this server.
INT rlRadiusServerAcctPortNumber	1.3.6.1.4.1.171.10.94.89.89.80.7.1.3	INTEGER	read-write	The UDP port the client is using to send accounting requests to this server.
INT rlRadiusServerTimeout	1.3.6.1.4.1.171.10.94.89.89.80.7.1.4	INTEGER	read-write	The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.
INT rlRadiusServerRetries	1.3.6.1.4.1.171.10.94.89.89.80.7.1.5	INTEGER	read-write	The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries.
INT rlRadiusServerDeadtime	1.3.6.1.4.1.171.10.94.89.89.80.7.1.6	INTEGER	read-write	Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used.
T/F rlRadiusServerUseGlobalDefaultKey	1.3.6.1.4.1.171.10.94.89.89.80.7.1.7	TruthValue	read-write	If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used.
STR rlRadiusServerKey	1.3.6.1.4.1.171.10.94.89.89.80.7.1.8	DisplayString	read-write	Secret key to be shared with this RADIUS server.
IP rlRadiusServerSource	1.3.6.1.4.1.171.10.94.89.89.80.7.1.9	IpAddress	read-write	IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used.
INT rlRadiusServerPriority	1.3.6.1.4.1.171.10.94.89.89.80.7.1.10	INTEGER	read-write	Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
ROW rlRadiusServerStatus	1.3.6.1.4.1.171.10.94.89.89.80.7.1.11	RowStatus	read-write
INT rlRadiusServerUsage	1.3.6.1.4.1.171.10.94.89.89.80.7.1.12	INTEGER	read-write	Determines actions for which the radius server will be used.
rlRadiusServerInetTable	1.3.6.1.4.1.171.10.94.89.89.80.8		not-accessible	The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
rlRadiusServerInetEntry	1.3.6.1.4.1.171.10.94.89.89.80.8.1		not-accessible	An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
IPt rlRadiusServerInetAddressType	1.3.6.1.4.1.171.10.94.89.89.80.8.1.1	InetAddressType	read-write	The Inet address type of RADIUS server reffered to in this table entry .IPv6Z type is not supported.
IP rlRadiusServerInetAddress	1.3.6.1.4.1.171.10.94.89.89.80.8.1.2	InetAddress	read-write	The Inet address of the RADIUS server referred to in this table entry.Only one instance of specified address can be added at the same time.
INT rlRadiusServerInetAuthPortNumber	1.3.6.1.4.1.171.10.94.89.89.80.8.1.3	INTEGER	read-write	The UDP port the client is using to send authentication requests to this server.The zero value can be used only if rlRadiusServerInetAcctPortNumber value is not zero.
INT rlRadiusServerInetAcctPortNumber	1.3.6.1.4.1.171.10.94.89.89.80.8.1.4	INTEGER	read-write	The UDP port the client is using to send accounting requests to this server.The zero value can be used only if rlRadiusServerInetAuthPortNumber value is not zero.
INT rlRadiusServerInetTimeout	1.3.6.1.4.1.171.10.94.89.89.80.8.1.5	INTEGER	read-write	The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.
INT rlRadiusServerInetRetries	1.3.6.1.4.1.171.10.94.89.89.80.8.1.6	INTEGER	read-write	The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries.
INT rlRadiusServerInetDeadtime	1.3.6.1.4.1.171.10.94.89.89.80.8.1.7	INTEGER	read-write	Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used.
T/F rlRadiusServerInetUseGlobalDefaultKey	1.3.6.1.4.1.171.10.94.89.89.80.8.1.8	TruthValue	read-write	If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used.
STR rlRadiusServerInetKey	1.3.6.1.4.1.171.10.94.89.89.80.8.1.9	DisplayString	read-write	Secret key to be shared with this RADIUS server.
IPt rlRadiusServerInetSourceType	1.3.6.1.4.1.171.10.94.89.89.80.8.1.10	InetAddressType	read-write	The rlRadiusServerInetSource address type. IPv6Z type not supported
IP rlRadiusServerInetSource	1.3.6.1.4.1.171.10.94.89.89.80.8.1.11	InetAddress	read-write	Inet address of the interface to use with this server. To provide backward compatibility the value of 0.0.0.0 for this object will be used to disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used for Ipv4 servers and rlRadiusIPv6GlobalDefaultSource will be used for Ipv6 servers.IPv6Z type not supported. Only valid IP address will be used. Application will set default value.
INT rlRadiusServerInetPriority	1.3.6.1.4.1.171.10.94.89.89.80.8.1.12	INTEGER	read-write	Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
ROW rlRadiusServerInetStatus	1.3.6.1.4.1.171.10.94.89.89.80.8.1.13	RowStatus	read-write
INT rlRadiusServerInetUsage	1.3.6.1.4.1.171.10.94.89.89.80.8.1.14	INTEGER	read-write	Determines actions for which the radius server will be used. WirelessAuthentication will be used if wireless is supported.
ADR rlRadiusGlobalIPv6DefaultSource	1.3.6.1.4.1.171.10.94.89.89.80.9	InetAddressIPv6	read-write	IPv6 address of the interface to use with this server. A NULL value for this object disables source address specification.
rlAAAEapMethodListTable	1.3.6.1.4.1.171.10.94.89.89.97.1		not-accessible	The table specifies all methods list per method name.
rlAAAEapMethodListEntry	1.3.6.1.4.1.171.10.94.89.89.97.1.1		not-accessible	The row definition for this table.
STR rlAAAEapMethodListName	1.3.6.1.4.1.171.10.94.89.89.97.1.1.1	DisplayString	read-write	Line Method List Name
RLA rlAAAEapMethodType1	1.3.6.1.4.1.171.10.94.89.89.97.1.1.2	RlAAAEapMethodtype	read-write	first method type that will be used in the method linked list.
RLA rlAAAEapMethodType2	1.3.6.1.4.1.171.10.94.89.89.97.1.1.3	RlAAAEapMethodtype	read-write	second method type that will be used in the method linked list.
RLA rlAAAEapMethodType3	1.3.6.1.4.1.171.10.94.89.89.97.1.1.4	RlAAAEapMethodtype	read-write	3th method type that will be used in the method linked list.
RLA rlAAAEapMethodType4	1.3.6.1.4.1.171.10.94.89.89.97.1.1.5	RlAAAEapMethodtype	read-write	4th method type that will be used in the method linked list.
RLA rlAAAEapMethodType5	1.3.6.1.4.1.171.10.94.89.89.97.1.1.6	RlAAAEapMethodtype	read-write	5th method type that will be used in the method linked list.
ROW rlAAAEapMethodListStatus	1.3.6.1.4.1.171.10.94.89.89.97.1.1.7	RowStatus	read-write	method list status can be destroy or createAndGo
STR rlAAAEapCurrentMethodList	1.3.6.1.4.1.171.10.94.89.89.97.2	DisplayString	read-write	Specifies the method list that will be used for authentication.

RFC description

Authentication, authorization, and accounting (AAA) management for D-Link 3100 series switches.

Start monitoring D-Link DES-3100/DGS-3100 series managed switch (AAA) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-AAA