All MIBs › DL5400-MIB › comm2SerialPortState
comm2SerialPortState
Module: DL5400-MIB
OID (symbolic): DL5400-MIB::comm2SerialPortState
OID (numeric): 1.3.6.1.4.1.300.110.1.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to enable or disable port.
What is comm2SerialPortState?
Enables or disables the COMM2 serial port; defaults to enabled, and an admin disables it to close off that access path on units where it isn't used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.1 snmpwalk -v2c -c public <target> DL5400-MIB::comm2SerialPortState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.1.1 snmpget -v2c -c public <target> DL5400-MIB::comm2SerialPortState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.110.1.6.1.1 i <value>
Start monitoring Legacy DL5400 access/transport equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL5400-MIB::comm2SerialPortState OID value, configure state conditions and alerts, and monitor any Legacy DL5400 access/transport equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300.110 | dl5400 | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1 | configuration | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6 | comm2SerialConfig | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6.1 | comm2SerialPortState | DL5400-MIB |