All MIBs › DL5400-MIB › comm2SerialFlowControl
comm2SerialFlowControl
Module: DL5400-MIB
OID (symbolic): DL5400-MIB::comm2SerialFlowControl
OID (numeric): 1.3.6.1.4.1.300.110.1.6.6
Node type: OBJECT-TYPE
Type: DL5400commFlowControl
Access: read-write
Description: COMM 2 Flow Control. HwFlowControl option is not applicable for multidrop serial port when in MultiDrop mode
What is comm2SerialFlowControl?
Sets the flow-control method used by the COMM2 serial port; note that hardware flow control is not applicable when this port is configured for multidrop mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.6 snmpwalk -v2c -c public <target> DL5400-MIB::comm2SerialFlowControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.6.1 snmpget -v2c -c public <target> DL5400-MIB::comm2SerialFlowControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.110.1.6.6.1 s <value>
Start monitoring Legacy DL5400 access/transport equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL5400-MIB::comm2SerialFlowControl OID value, configure state conditions and alerts, and monitor any Legacy DL5400 access/transport equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300.110 | dl5400 | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1 | configuration | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6 | comm2SerialConfig | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6.6 | comm2SerialFlowControl | DL5400-MIB |