All MIBs › DL5400-MIB › comm2SerialBaudRate
comm2SerialBaudRate
Module: DL5400-MIB
OID (symbolic): DL5400-MIB::comm2SerialBaudRate
OID (numeric): 1.3.6.1.4.1.300.110.1.6.2
Node type: OBJECT-TYPE
Type: DL5400commBaudRate
Access: read-write
Description: COMM 2 Baud Rate.
What is comm2SerialBaudRate?
Sets the baud rate (bits per second) used by the COMM2 serial port; an admin must match this to whatever terminal or modem is physically connected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.2 snmpwalk -v2c -c public <target> DL5400-MIB::comm2SerialBaudRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.110.1.6.2.1 snmpget -v2c -c public <target> DL5400-MIB::comm2SerialBaudRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.110.1.6.2.1 s <value>
Start monitoring Legacy DL5400 access/transport equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL5400-MIB::comm2SerialBaudRate OID value, configure state conditions and alerts, and monitor any Legacy DL5400 access/transport equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300.110 | dl5400 | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1 | configuration | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6 | comm2SerialConfig | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.6.2 | comm2SerialBaudRate | DL5400-MIB |