All MIBs › DL5400-MIB › comm1SerialLogoutOnLos
comm1SerialLogoutOnLos
Module: DL5400-MIB
OID (symbolic): DL5400-MIB::comm1SerialLogoutOnLos
OID (numeric): 1.3.6.1.4.1.300.110.1.5.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to enable or disable auto-logoff on loss of DSR.
What is comm1SerialLogoutOnLos?
When enabled (the default), a COMM1 session automatically logs off if the serial port loses its DSR (Data Set Ready) signal, e.g. because the connected terminal was unplugged, closing the session rather than leaving it open indefinitely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.110.1.5.7 snmpwalk -v2c -c public <target> DL5400-MIB::comm1SerialLogoutOnLos
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.110.1.5.7.1 snmpget -v2c -c public <target> DL5400-MIB::comm1SerialLogoutOnLos.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.110.1.5.7.1 i <value>
Start monitoring Legacy DL5400 access/transport equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL5400-MIB::comm1SerialLogoutOnLos OID value, configure state conditions and alerts, and monitor any Legacy DL5400 access/transport equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300.110 | dl5400 | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1 | configuration | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.5 | comm1SerialConfig | DL5400-MIB |
| 1.3.6.1.4.1.300.110.1.5.7 | comm1SerialLogoutOnLos | DL5400-MIB |