DL-NEW-DSX1-MIB :: dlcUnitTestLength

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DL-NEW-DSX1-MIB › dlcUnitTestLength

dlcUnitTestLength

Module: DL-NEW-DSX1-MIB

OID (symbolic): DL-NEW-DSX1-MIB::dlcUnitTestLength

OID (numeric): 1.3.6.1.4.1.300.200.2.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines the time interval after which tests are automatically terminated. Valid values are 0, 1, 15 and 60. 0 stands for unlimited, 1 for 1 minute, 15 for 15 minutes and 60 for 60 minutes.

What is dlcUnitTestLength?

Sets how long a diagnostic test runs before the unit automatically terminates it: 0 means unlimited, or 1, 15, or 60 minutes. Use a bounded value for routine tests so you don't accidentally leave a loopback test running and blocking traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.10
snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcUnitTestLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.10.1
snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcUnitTestLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.10.1 i <value>

Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcUnitTestLength OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.300digital_linkDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200dl_new_t1DL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2dlcUnitConfigDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.10dlcUnitTestLengthDL-NEW-DSX1-MIB