All MIBs › DL-NEW-DSX1-MIB › dlcSnmpUnitIpAddr
dlcSnmpUnitIpAddr
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcSnmpUnitIpAddr
OID (numeric): 1.3.6.1.4.1.300.200.2.24.1
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: Specifies the IP address that is assigned to this unit.
What is dlcSnmpUnitIpAddr?
The IP address assigned to this unit for SNMP/management access. Changing it remotely via SNMP is risky, since a wrong value can cut off the very session you're using to set it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.1 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpUnitIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.1.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpUnitIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.24.1.1 a <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcSnmpUnitIpAddr OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24 | dlcUnitSnmpConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24.1 | dlcSnmpUnitIpAddr | DL-NEW-DSX1-MIB |