All MIBs › DL-NEW-DSX1-MIB › dlcSnmpTrapDlci1
dlcSnmpTrapDlci1
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcSnmpTrapDlci1
OID (numeric): 1.3.6.1.4.1.300.200.2.24.6
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
Description: Specifies the first of three DLCI value to which this unit sends TRAP PDUs.
What is dlcSnmpTrapDlci1?
The first of up to three Frame Relay DLCI values the unit uses when sending TRAP PDUs over a frame-relay-based management path rather than a direct IP path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.6 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpTrapDlci1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.6.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpTrapDlci1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.24.6.1 i <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcSnmpTrapDlci1 OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24 | dlcUnitSnmpConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24.6 | dlcSnmpTrapDlci1 | DL-NEW-DSX1-MIB |