All MIBs › DL-NEW-DSX1-MIB › dlcSnmpTrapAddr3
dlcSnmpTrapAddr3
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcSnmpTrapAddr3
OID (numeric): 1.3.6.1.4.1.300.200.2.24.5
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: Specifies the IP address of the management station to which this unit sends traps.
What is dlcSnmpTrapAddr3?
The IP address of the third management station this unit sends SNMP traps to, completing the set of up to three simultaneous trap destinations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.5 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpTrapAddr3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.24.5.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcSnmpTrapAddr3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.24.5.1 a <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcSnmpTrapAddr3 OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24 | dlcUnitSnmpConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.24.5 | dlcSnmpTrapAddr3 | DL-NEW-DSX1-MIB |