All MIBs › DL-NEW-DSX1-MIB › dlcModemInitString2
dlcModemInitString2
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcModemInitString2
OID (numeric): 1.3.6.1.4.1.300.200.2.27.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: In setting up a modem connection, the second group of commands used to initialize the modem. There is a delay between sending the first and second groups of initialzation commands.
What is dlcModemInitString2?
The second group of modem initialization commands, sent after a delay following the first group in dlcModemInitString1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.27.4 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcModemInitString2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.27.4.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcModemInitString2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.27.4.1 s <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcModemInitString2 OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.27 | dlcUnitModemConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.27.4 | dlcModemInitString2 | DL-NEW-DSX1-MIB |