DL-NEW-DSX1-MIB :: dlcLinkTestPattern

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DL-NEW-DSX1-MIB › dlcLinkTestPattern

dlcLinkTestPattern

Module: DL-NEW-DSX1-MIB

OID (symbolic): DL-NEW-DSX1-MIB::dlcLinkTestPattern

OID (numeric): 1.3.6.1.4.1.300.200.2.33.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the test pattern for the next link based test.

What is dlcLinkTestPattern?

Selects the test data pattern for the next link-based test: ping511, ping2047, ping1-0, ping-all-1, or ping-all-0. Different patterns stress the line differently; an all-ones or all-zeros pattern is a good check for ones-density/clock-recovery problems that a pseudo-random pattern might not expose.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.33.8
snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLinkTestPattern

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.33.8.1
snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLinkTestPattern.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.33.8.1 i <value>

Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcLinkTestPattern OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.300digital_linkDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200dl_new_t1DL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2dlcUnitConfigDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.33dlcUnitConfigLinkTestDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.33.8dlcLinkTestPatternDL-NEW-DSX1-MIB