All MIBs › DL-NEW-DSX1-MIB › dlcLinkTestDlci
dlcLinkTestDlci
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcLinkTestDlci
OID (numeric): 1.3.6.1.4.1.300.200.2.33.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the frame relay DLCI for the next link based test to run. This value is used when the unit is in frameRelay InbandMode only and if the next link based test is not done on the commPort.
What is dlcLinkTestDlci?
The Frame Relay DLCI the next link-based test will use, relevant only when the unit is in frameRelay inband mode and the test isn't running over the commPort.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.33.3 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLinkTestDlci
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.33.3.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLinkTestDlci.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.33.3.1 i <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcLinkTestDlci OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.33 | dlcUnitConfigLinkTest | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.33.3 | dlcLinkTestDlci | DL-NEW-DSX1-MIB |