All MIBs › DL-NEW-DSX1-MIB › dlcLMIEnable
dlcLMIEnable
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcLMIEnable
OID (numeric): 1.3.6.1.4.1.300.200.2.41.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies whether to enable or disable LMI Conditioning.
What is dlcLMIEnable?
Enables or disables LMI Conditioning, the feature that lets this unit spoof LMI (Local Management Interface) status messages to keep a router's frame relay interface up even when the actual carrier link is down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.41.1.1 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLMIEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.41.1.1.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcLMIEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.41.1.1.1 i <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcLMIEnable OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.41 | dlcLMIConditioningGroup | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.41.1 | dlcLMIConfiguration | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.41.1.1 | dlcLMIEnable | DL-NEW-DSX1-MIB |