DL-NEW-DSX1-MIB :: dlcDsx1InBandBit

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DL-NEW-DSX1-MIB › dlcDsx1InBandBit

dlcDsx1InBandBit

Module: DL-NEW-DSX1-MIB

OID (symbolic): DL-NEW-DSX1-MIB::dlcDsx1InBandBit

OID (numeric): 1.3.6.1.4.1.300.200.2.21.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies which bit in Timeslot 1 of an E1 link is used to pass message traffic. Not implemented for T1 ports.

What is dlcDsx1InBandBit?

Selects which bit (1-8) in Timeslot 1 of an E1 link carries inband message traffic; not implemented for T1 ports. Change it only if the far end expects the inband management channel on a specific bit position.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.21.1.9
snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDsx1InBandBit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.21.1.9.1
snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDsx1InBandBit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.21.1.9.1 i <value>

Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcDsx1InBandBit OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.300digital_linkDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200dl_new_t1DL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2dlcUnitConfigDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.21dlcUnitDsx1ConfigTableDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.21.1dlcDsx1ConfigEntryDL-NEW-DSX1-MIB
1.3.6.1.4.1.300.200.2.21.1.9dlcDsx1InBandBitDL-NEW-DSX1-MIB