All MIBs › DL-NEW-DSX1-MIB › dlcDsx1BpvThresholdTrap
dlcDsx1BpvThresholdTrap
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcDsx1BpvThresholdTrap
OID (numeric): 1.3.6.1.4.1.300.200.2.14.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines Bipolar Violation Error Rate threshold in units of BPV errors per minute. When this threshold is exceeded, the unit will send a trap to the SNMP manager. The threshold is of the form M x 10 ^ -E where M is a mantissa and E the exponent. Both are single digit values. M and E are represented in this value as one number: (M) x 10 + (E). For example, the threshold 7x10^-3 BPVs/min is encoded as the integer 73. A value of 0 disables the trap altogether.
Valid values for dlcDsx1BpvThresholdTrap are: 13 23 33 43 53 63 14 24 34 44 54 64 74 84 94 15 25 35 45 55 65 75 85 95 16 26 36 46 56 66 76 86 96 17 27 37 47 57 67 77 87 97 28 38 48 58 68 78 88 98 or, from 6E-3 to 2E-8.
N.B. The BPV Threshold Alarm exists only for the mainNet and otherNet Port IDs, so setting the Threshold for the aux PortId will always fail. The BPV Threshold is always reported as 0 for the aux PortId.
What is dlcDsx1BpvThresholdTrap?
Sets the Bipolar Violation error-rate threshold, in BPV errors/minute, above which the unit sends a trap; encoded as mantissa*10+exponent (e.g. 73 means 7x10^-3/min), with 0 disabling the trap. This alarm only exists for the mainNet and otherNet ports; trying to set it on the aux port always fails and always reads back as 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.14.1.2 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDsx1BpvThresholdTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.14.1.2.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDsx1BpvThresholdTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.14.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dlcDsx1BpvThresholdTrap.1
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcDsx1BpvThresholdTrap OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.14 | dlcUnitDsx1TrapEnableTable | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.14.1 | dlcDsx1TrapEnableEntry | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.14.1.2 | dlcDsx1BpvThresholdTrap | DL-NEW-DSX1-MIB |