All MIBs › DL-NEW-DSX1-MIB › dlcDataLossEnable
dlcDataLossEnable
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcDataLossEnable
OID (numeric): 1.3.6.1.4.1.300.200.2.15.1.2
Node type: OBJECT-TYPE
Type: Boolean
Access: read-write
Description: Says whether to enable this trap.
What is dlcDataLossEnable?
Enables or disables a trap when signal loss is detected on this Data DTE port. Turn it on for ports connected to critical downstream equipment you want alerted about immediately if the cable or device fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.15.1.2 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDataLossEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.15.1.2.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDataLossEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.15.1.2.1 s <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcDataLossEnable OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.15 | dlcUnitDataDteLossTrapEnableTable | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.15.1 | dlcDataDteLossTrapEnableEntry | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.15.1.2 | dlcDataLossEnable | DL-NEW-DSX1-MIB |