All MIBs › DL-NEW-DSX1-MIB › dlcDataConfigFormat
dlcDataConfigFormat
Module: DL-NEW-DSX1-MIB
OID (symbolic): DL-NEW-DSX1-MIB::dlcDataConfigFormat
OID (numeric): 1.3.6.1.4.1.300.200.2.22.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Selects V.35 or RS449 format.
What is dlcDataConfigFormat?
Selects the physical interface format for this Data DTE port, V.35 or RS449. It must match the interface type of the cable and connected equipment, since the two standards use different pinouts and signal levels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.300.200.2.22.1.5 snmpwalk -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDataConfigFormat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.300.200.2.22.1.5.1 snmpget -v2c -c public <target> DL-NEW-DSX1-MIB::dlcDataConfigFormat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.300.200.2.22.1.5.1 i <value>
Start monitoring Digital Link DSX1 (T1/E1) WAN access unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DL-NEW-DSX1-MIB::dlcDataConfigFormat OID value, configure state conditions and alerts, and monitor any Digital Link DSX1 (T1/E1) WAN access unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.300 | digital_link | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200 | dl_new_t1 | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2 | dlcUnitConfig | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.22 | dlcUnitDataDteConfigTable | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.22.1 | dlcDataDteConfigEntry | DL-NEW-DSX1-MIB |
| 1.3.6.1.4.1.300.200.2.22.1.5 | dlcDataConfigFormat | DL-NEW-DSX1-MIB |