DIAMETER-CC-APPLICATION-MIB :: dccaPeerVendorRowStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DIAMETER-CC-APPLICATION-MIB › dccaPeerVendorRowStatus

dccaPeerVendorRowStatus

Module: DIAMETER-CC-APPLICATION-MIB

OID (symbolic): DIAMETER-CC-APPLICATION-MIB::dccaPeerVendorRowStatus

OID (numeric): 1.3.6.1.2.1.119.2.1.2.2.1.4

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-create

Description: The status of this conceptual row.

To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the dccaPeerVendorRowStatus column is 'notReady'.

In particular, a newly created row cannot be made active until the corresponding dccaPeerVendorId has been set.

dccaPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of dccaPeerVendorRowStatus is active(1) will result in an inconsistentValue error.

Entries in this table with dccaPeerVendorRowStatus equal to active(1) remain in the table until destroyed.

Entries in this table with dccaPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).

If the peer vendor id being created via SNMP already exists in another active dccaPeerVendorEntry, then a newly created row cannot be made active until the original row with the peer vendor id value is destroyed.

Upon reload, dccaPeerVendorIndex values may be changed.

What is dccaPeerVendorRowStatus?

The RowStatus governing a single vendor-ID entry under a peer — set to createAndGo/createAndWait to register a new supported vendor ID for that peer, following the same active/notReady/timeout lifecycle as dccaPeerStatus.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.119diameterBasePMIBDIAMETER-BASE-PROTOCOL-MIB
Numeric OIDNameModule
1.3.6.1.2.1.119.2diameterCcAppMIBDIAMETER-CC-APPLICATION-MIB
1.3.6.1.2.1.119.2.1diameterCcAppObjectsDIAMETER-CC-APPLICATION-MIB
1.3.6.1.2.1.119.2.1.2dccaPeerCfgsDIAMETER-CC-APPLICATION-MIB
1.3.6.1.2.1.119.2.1.2.2dccaPeerVendorTableDIAMETER-CC-APPLICATION-MIB
1.3.6.1.2.1.119.2.1.2.2.1dccaPeerVendorEntryDIAMETER-CC-APPLICATION-MIB
1.3.6.1.2.1.119.2.1.2.2.1.4dccaPeerVendorRowStatusDIAMETER-CC-APPLICATION-MIB