All MIBs › DGS3612G-L2MGMT-MIB › swL2PVIDAutoAssignmentState
swL2PVIDAutoAssignmentState
Module: DGS3612G-L2MGMT-MIB
OID (symbolic): DGS3612G-L2MGMT-MIB::swL2PVIDAutoAssignmentState
OID (numeric): 1.3.6.1.4.1.171.11.70.9.2.17.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change PVID.
If 'Auto-assign PVID' is enabled, PVID will be possibly changed by PVID or VLAN configuration. When user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. In the form of VLAN list command, PVID is updated with last item of VLAN list. When user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned with 'default VLAN'.
What is swL2PVIDAutoAssignmentState?
Controls whether a port's PVID (default/untagged VLAN) updates automatically as VLAN membership changes: when disabled, PVID only changes through explicit PVID configuration; when enabled, adding a port as untagged to VLAN X automatically updates its PVID to X (or to the last VLAN in a VLAN-list command), and removing it from its PVID's untagged membership resets the PVID back to the default VLAN. An admin enables this to keep PVID in sync automatically rather than tracking it manually alongside VLAN membership changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.9.2.17.2 snmpwalk -v2c -c public <target> DGS3612G-L2MGMT-MIB::swL2PVIDAutoAssignmentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.9.2.17.2.1 snmpget -v2c -c public <target> DGS3612G-L2MGMT-MIB::swL2PVIDAutoAssignmentState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.70.9.2.17.2.1 i <value>
Start monitoring D-Link DGS-3612G Gigabit Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3612G-L2MGMT-MIB::swL2PVIDAutoAssignmentState OID value, configure state conditions and alerts, and monitor any D-Link DGS-3612G Gigabit Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.70 | dgsProjectXStackIISeriesProd | SW34XXPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9 | dgs3612g | SW36XXPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.70.9.2 | swL2MgmtMIB | DGS3612G-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9.2.17 | swL2VlanMgmt | DGS3612G-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9.2.17.2 | swL2PVIDAutoAssignmentState | DGS3612G-L2MGMT-MIB |