All MIBs › DGS3612G-L2MGMT-MIB › swDevInfoFrontPanelLedStatus
swDevInfoFrontPanelLedStatus
Module: DGS3612G-L2MGMT-MIB
OID (symbolic): DGS3612G-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.70.9.2.1.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.
Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.
The second significant bit is used for link status: 1 = link fail. 2 = link pass.
Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps.
The four remaining bits are currently unused and must be 0.
What is swDevInfoFrontPanelLedStatus?
Encodes the current state of every LED on the switch's front panel as a packed byte string: the first two bytes cover the system-wide Power, Console and Redundant Power Supply LEDs, and each following pair of bytes reports one port's Link/Activity LED and Speed LED (10/100/1000Mbps/10Gbps) in dot1dBasePort order. Management software decodes this rather than needing to physically inspect the switch, for example to confirm port 5 is blinking green at 1000Mbps link speed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.9.2.1.1.6 snmpwalk -v2c -c public <target> DGS3612G-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.9.2.1.1.6.1 snmpget -v2c -c public <target> DGS3612G-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> swDevInfoFrontPanelLedStatus.1
Start monitoring D-Link DGS-3612G Gigabit Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3612G-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3612G Gigabit Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.70 | dgsProjectXStackIISeriesProd | SW34XXPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9 | dgs3612g | SW36XXPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.70.9.2 | swL2MgmtMIB | DGS3612G-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9.2.1 | swL2DevMgmt | DGS3612G-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9.2.1.1 | swL2DevInfo | DGS3612G-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.9.2.1.1.6 | swDevInfoFrontPanelLedStatus | DGS3612G-L2MGMT-MIB |