All MIBs › DGS3426P-L2MGMT-MIB › swDevInfoFrontPanelLedStatus
swDevInfoFrontPanelLedStatus
Module: DGS3426P-L2MGMT-MIB
OID (symbolic): DGS3426P-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.70.7.2.1.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The fourth LED is Link/ACT/Speed LED. The fifth LED is POE LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.
Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.
The second significant bit is used for link status: 1 = link fail. 2 = link pass.
Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps.
The four remaining bits are currently unused and must be 0.
What is swDevInfoFrontPanelLedStatus?
Encodes the current state of every front-panel LED as packed bit fields covering power, console, RPS, POE, and per-port link/speed LEDs, letting a management station remotely mirror what an admin would see by looking at the chassis. For example, the Link/Activity byte for a port pair distinguishes link-fail from link-pass so port status can be checked without walking over to the switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.7.2.1.1.6 snmpwalk -v2c -c public <target> DGS3426P-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.7.2.1.1.6.1 snmpget -v2c -c public <target> DGS3426P-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1
Start monitoring D-Link DGS-3426P managed PoE switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3426P-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3426P managed PoE switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.70 | dgsProjectXStackIISeriesProd | SW34XXPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.70.7 | dgs3426p | SW34XXPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.70.7.2 | swL2MgmtMIB | DGS3426P-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.7.2.1 | swL2DevMgmt | DGS3426P-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.7.2.1.1 | swL2DevInfo | DGS3426P-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.70.7.2.1.1.6 | swDevInfoFrontPanelLedStatus | DGS3426P-L2MGMT-MIB |