All MIBs › DFL260e-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: Domain: Security, Technology: VPN, Vendor: DFL/Clavister
Description: Manages Clavister/DFL 260e security gateway firewall configuration, VPN, and traffic statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL260e-MIB?
DFL260e-MIB is a vendor-specific MIB from D-Link Corporation for the DFL-260e NetDefend UTM firewall appliance (built on Clavister-derived firmware, as the hint notes, though the MODULE-IDENTITY itself is authored by D-Link), managing firewall/gateway performance and traffic statistics as described. It exposes system-level counters under dfl260eSystem (dfl260eSysCpuLoad, dfl260eSysForwardedBits/Packets, dfl260eSysBuffUse, dfl260eSysConns) and per-protocol-state gauges under dfl260eSysPerStateCounters (dfl260eSysPscTcpSyn/Open/Fin, dfl260eSysPscUdp, dfl260eSysPscIcmp), per-interface statistics via dfl260eIfStatsTable (including 64-bit dfl260eIfHCPktsInCnt/HCBitsOutCnt high-capacity counters), and application-layer gateway monitoring through dfl260eHttpAlgTable and dfl260eSmtpAlgTable (including SMTP DNS-blacklist stats). It depends only on standard SNMPv2-SMI/TC/CONF types and its own dfl260eMibModules registration tree, requiring no external MIB imports beyond the base SNMP framework. It is deployed on D-Link DFL-260e UTM security gateways handling firewall, VPN, and application-layer filtering in small/branch-office networks, and DFL260e-MIB SNMP monitoring is typically used to track CPU load, connection-state distribution, and per-interface throughput on the appliance.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL260e-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-260e NetDefend UTM firewall appliance
Monitoring Examples
An operator polls dfl260eSysCpuLoad and dfl260eSysConns to baseline appliance load, then checks dfl260eSysPerStateCounters for an unusual spike in dfl260eSysPscTcpSyn relative to dfl260eSysPscTcpOpen; a sustained high SYN count with low corresponding OPEN count would suggest a SYN-flood condition or half-open connection buildup against the firewall.
What Can Be Monitored
- CPU load and connection buffer usage
- per-protocol connection-state counters (SYN/OPEN/FIN/UDP/ICMP)
- per-interface packet/bit counters (32-bit and 64-bit)
- forwarded traffic totals
- HTTP/SMTP ALG statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl260eSysForwardedBits OID:
Select a D-Link DFL-260e NetDefend UTM firewall appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl260eSysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| utmFirewall | 1.3.6.1.4.1.171.20.2 | |||
| dfl260e | 1.3.6.1.4.1.171.20.2.6 | |||
| dfl260eOS | 1.3.6.1.4.1.171.20.2.6.1 | |||
| dfl260eOSStats | 1.3.6.1.4.1.171.20.2.6.1.2 | |||
| dfl260eSystem | 1.3.6.1.4.1.171.20.2.6.1.2.1 | |||
| G32 dfl260eSysCpuLoad | 1.3.6.1.4.1.171.20.2.6.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl260eSysForwardedBitsEx | 1.3.6.1.4.1.171.20.2.6.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl260eSysForwardedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl260eSysBuffUse | 1.3.6.1.4.1.171.20.2.6.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl260eSysConns | 1.3.6.1.4.1.171.20.2.6.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl260eSysPerStateCounters | 1.3.6.1.4.1.171.20.2.6.1.2.1.6 | |||
| G32 dfl260eSysPscTcpSyn | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl260eSysPscTcpOpen | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl260eSysPscTcpFin | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl260eSysPscUdp | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl260eSysPscIcmp | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl260eSysPscOther | 1.3.6.1.4.1.171.20.2.6.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl260eIfStatsTable | 1.3.6.1.4.1.171.20.2.6.1.2.1.7 | not-accessible | A table of DFL-260e specific interfaces statistics | |
| dfl260eIfStatsEntry | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1 | not-accessible | The row in a table of DFL-260e specific interface statistics | |
| I32 dfl260eIfStatsIndex | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl260eSysIfStatsTable |
| STR dfl260eIfName | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl260eIfFragsIn | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl260eIfFragReassOk | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl260eIfFragReassFail | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl260eIfPktsInCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl260eIfPktsOutCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl260eIfBitsInCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl260eIfBitsOutCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl260eIfPktsTotCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl260eIfBitsTotCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl260eIfHCPktsInCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl260eIfPktsInCnt. |
| C64 dfl260eIfHCPktsOutCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl260eIfPktsOutCnt. |
| C64 dfl260eIfHCBitsInCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl260eIfBitsInCnt. |
| C64 dfl260eIfHCBitsOutCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl260eIfBitsOutCnt. |
| C64 dfl260eIfHCPktsTotCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl260eIfPktsTotCnt. |
| C64 dfl260eIfHCBitsTotCnt | 1.3.6.1.4.1.171.20.2.6.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl260eIfBitsTotCnt. |
| dfl260eIfRxRingTable | 1.3.6.1.4.1.171.20.2.6.1.2.1.8 | not-accessible | A table of DFL-260e specific interface Rx ring statistics | |
| dfl260eIfRxRingEntry | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1 | not-accessible | The row in a table of DFL-260e specific interface Rx ring statistics. | |
| I32 dfl260eIfRxRingIndex | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl260eIfRxRingTable. |
| C32 dfl260eIfRxRingFifoErrors | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl260eIfRxDespools | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl260eIfRxAvgUse | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl260eIfRxRingSaturation | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl260eRxRingFlooded | 1.3.6.1.4.1.171.20.2.6.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl260eIfTxRingTable | 1.3.6.1.4.1.171.20.2.6.1.2.1.9 | not-accessible | A table of DFL-260e specific interface Tx ring statistics | |
| dfl260eIfTxRingEntry | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1 | not-accessible | The row in a table of DFL-260e specific interface Tx ring statistics. | |
| I32 dfl260eIfTxRingIndex | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl260eIfRxRingTable. |
| G32 dfl260eIfTxDespools | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl260eIfTxAvgUse | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl260eIfTxRingSaturation | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl260eRxTingFlooded | 1.3.6.1.4.1.171.20.2.6.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl260eIfVlanStatsTable | 1.3.6.1.4.1.171.20.2.6.1.2.1.10 | not-accessible | A table of DFL-260e VLAN statistics | |
| dfl260eIfVlanStatsEntry | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1 | not-accessible | The row in a table of dfl260eIfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl260eIfVlanIndex | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl260eIfVlanStatsTable. |
| C32 dfl260eIfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl260eIfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl260eIfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl260eIfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl260eIfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl260eIfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.2.6.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl260eHWSensorTable | 1.3.6.1.4.1.171.20.2.6.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl260eHWSensorEntry | 1.3.6.1.4.1.171.20.2.6.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl260eHWSensorIndex | 1.3.6.1.4.1.171.20.2.6.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl260eHWSensorName | 1.3.6.1.4.1.171.20.2.6.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl260eHWSensorValue | 1.3.6.1.4.1.171.20.2.6.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl260eHWSensorUnit | 1.3.6.1.4.1.171.20.2.6.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl260eSysMemUsage | 1.3.6.1.4.1.171.20.2.6.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl260eSysTCPUsage | 1.3.6.1.4.1.171.20.2.6.1.2.1.13 | |||
| G32 dfl260eSysTCPRecvSmall | 1.3.6.1.4.1.171.20.2.6.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl260eSysTCPRecvLarge | 1.3.6.1.4.1.171.20.2.6.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl260eSysTCPSendSmall | 1.3.6.1.4.1.171.20.2.6.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl260eSysTCPSendLarge | 1.3.6.1.4.1.171.20.2.6.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl260eSysTimerUsage | 1.3.6.1.4.1.171.20.2.6.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl260eSysConnOPS | 1.3.6.1.4.1.171.20.2.6.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl260eSysConnCPS | 1.3.6.1.4.1.171.20.2.6.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl260eSysHCForwardedBits | 1.3.6.1.4.1.171.20.2.6.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl260eVPN | 1.3.6.1.4.1.171.20.2.6.1.2.2 | |||
| dfl260eIPsec | 1.3.6.1.4.1.171.20.2.6.1.2.2.1 | |||
| dfl260eIPsecGlobal | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1 | |||
| G32 dfl260eIPsecPhaseOneActive | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl260eIPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl260eIPsecQuickModeActive | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl260eIPsecPhaseOneDone | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl260eIPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl260eIPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl260eIPsecQuickModeDone | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl260eIPsecQuickModeFailed | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl260eIPsecInfoDone | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl260eIPsecInfoFailed | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl260eIPsecInOctetsComp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl260eIPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl260eIPsecOutOctetsComp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl260eIPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl260eIPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl260eIPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl260eIPsecInPackets | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl260eIPsecOutPackets | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl260eIPsecForwardedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl260eIPsecActiveTransforms | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl260eIPsecTotalTransforms | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl260eIPsecOutOfTransforms | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl260eIPsecTotalRekeys | 1.3.6.1.4.1.171.20.2.6.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl260eRules | 1.3.6.1.4.1.171.20.2.6.1.2.3 | |||
| dfl260eRuleUseTable | 1.3.6.1.4.1.171.20.2.6.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl260eRuleUseEntry | 1.3.6.1.4.1.171.20.2.6.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl260eRuleIndex | 1.3.6.1.4.1.171.20.2.6.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl260eRuleName | 1.3.6.1.4.1.171.20.2.6.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl260eRuleUse | 1.3.6.1.4.1.171.20.2.6.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl260eIPPools | 1.3.6.1.4.1.171.20.2.6.1.2.4 | |||
| I32 dfl260eIPPoolsNumber | 1.3.6.1.4.1.171.20.2.6.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl260eIPPoolTable | 1.3.6.1.4.1.171.20.2.6.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl260eIPPoolEntry | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl260eIPPoolIndex | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl260eIPPoolName | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl260eIPPoolPrepare | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl260eIPPoolFree | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl260eIPPoolMisses | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl260eIPPoolClientFails | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl260eIPPoolUsed | 1.3.6.1.4.1.171.20.2.6.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl260eDHCPServer | 1.3.6.1.4.1.171.20.2.6.1.2.5 | |||
| G32 dfl260eDHCPTotalRejected | 1.3.6.1.4.1.171.20.2.6.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl260eDHCPRuleTable | 1.3.6.1.4.1.171.20.2.6.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl260eDHCPRuleEntry | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl260eDHCPRuleIndex | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl260eDHCPRuleName | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl260eDHCPRuleUsage | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl260eDHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl260eDHCPActiveClients | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl260eDHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl260eDHCPRejectedRequests | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl260eDHCPTotalLeases | 1.3.6.1.4.1.171.20.2.6.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl260eUserAuth | 1.3.6.1.4.1.171.20.2.6.1.2.6 | |||
| G32 dfl260eUserAuthHTTPUsers | 1.3.6.1.4.1.171.20.2.6.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl260eUserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.2.6.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl260eUserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.2.6.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl260eUserAuthPPPUsers | 1.3.6.1.4.1.171.20.2.6.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl260eUserAuthEAPUsers | 1.3.6.1.4.1.171.20.2.6.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl260eUserAuthRuleUseTable | 1.3.6.1.4.1.171.20.2.6.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl260eUserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.2.6.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl260eUserAuthRuleIndex | 1.3.6.1.4.1.171.20.2.6.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl260eUserAuthRuleName | 1.3.6.1.4.1.171.20.2.6.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl260eUserAuthRuleUse | 1.3.6.1.4.1.171.20.2.6.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl260eLinkMonitor | 1.3.6.1.4.1.171.20.2.6.1.2.7 | |||
| I32 dfl260eLinkMonGrp | 1.3.6.1.4.1.171.20.2.6.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl260eLinkMonGrpTable | 1.3.6.1.4.1.171.20.2.6.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl260eLinkMonGrpEntry | 1.3.6.1.4.1.171.20.2.6.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl260eLinkMonGrpIndex | 1.3.6.1.4.1.171.20.2.6.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl260eLinkMonGrpName | 1.3.6.1.4.1.171.20.2.6.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl260eLinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.2.6.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl260eLinkMonHostTable | 1.3.6.1.4.1.171.20.2.6.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl260eLinkMonHostEntry | 1.3.6.1.4.1.171.20.2.6.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl260eLinkMonHostIndex | 1.3.6.1.4.1.171.20.2.6.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl260eLinkMonHostId | 1.3.6.1.4.1.171.20.2.6.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl260eLinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.2.6.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl260eLinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.2.6.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl260ePipes | 1.3.6.1.4.1.171.20.2.6.1.2.8 | |||
| G32 dfl260ePipeUsers | 1.3.6.1.4.1.171.20.2.6.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl260ePipeTable | 1.3.6.1.4.1.171.20.2.6.1.2.8.2 | not-accessible | Table of pipes | |
| dfl260ePipeEntry | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl260ePipeIndex | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl260ePipeName | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl260ePipeMinPrec | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl260ePipeMaxPrec | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl260ePipeDefPrec | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl260ePipeNumPrec | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl260ePipeNumUsers | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl260ePipeCurrentBps | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl260ePipeCurrentPps | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl260ePipeDelayedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl260ePipeDropedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl260ePipePrecTable | 1.3.6.1.4.1.171.20.2.6.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl260ePipePrecEntry | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl260ePipePrecIndex | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl260ePipePrecEntry. |
| I32 dfl260ePipePrec | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl260ePipePrecBps | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl260ePipePrecTotalPps | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl260ePipePrecReservedBps | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl260ePipePrecDynLimBps | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl260ePipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl260ePipePrecDelayedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl260ePipePrecDropedPackets | 1.3.6.1.4.1.171.20.2.6.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl260eALG | 1.3.6.1.4.1.171.20.2.6.1.2.9 | |||
| G32 dfl260eAlgSessions | 1.3.6.1.4.1.171.20.2.6.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl260eAlgConnections | 1.3.6.1.4.1.171.20.2.6.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl260eAlgTCPStreams | 1.3.6.1.4.1.171.20.2.6.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl260eHttpAlg | 1.3.6.1.4.1.171.20.2.6.1.2.9.4 | |||
| dfl260eHttpAlgTable | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl260eHttpAlgEntry | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl260eHttpAlgIndex | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl260eHttpAlgName | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl260eHttpAlgTotalRequested | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl260eHttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl260eHttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl260eHttpAlgCntFltTable | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl260eHttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl260eHttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl260eHttpAlgCntFltName | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl260eHttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl260eHttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl260eHttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.2.6.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl260eSmtpAlg | 1.3.6.1.4.1.171.20.2.6.1.2.9.5 | |||
| dfl260eSmtpAlgTable | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl260eSmtpAlgEntry | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl260eSmtpAlgIndex | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl260eSmtpAlgName | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl260eSmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl260eSmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl260eSmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl260eSmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl260eSmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl260eSmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl260eSmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl260eSmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl260eSmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl260eSmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.2.6.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl260eDHCPRelay | 1.3.6.1.4.1.171.20.2.6.1.2.11 | |||
| G32 dfl260eDHCPRelayCurClients | 1.3.6.1.4.1.171.20.2.6.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl260eDHCPRelayCurTrans | 1.3.6.1.4.1.171.20.2.6.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl260eDHCPRelayRejected | 1.3.6.1.4.1.171.20.2.6.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl260eDHCPRelayRuleTable | 1.3.6.1.4.1.171.20.2.6.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl260eDHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl260eDHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl260eDHCPRelayRuleName | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl260eDHCPRelayRuleHits | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl260eDHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl260eDHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl260eDHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.2.6.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl260eHA | 1.3.6.1.4.1.171.20.2.6.1.2.12 | |||
| G32 dfl260eHASyncSendQueueLength | 1.3.6.1.4.1.171.20.2.6.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl260eHASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.2.6.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl260eHASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.2.6.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl260eHASyncSentPackets | 1.3.6.1.4.1.171.20.2.6.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl260eHASyncSendResentPackets | 1.3.6.1.4.1.171.20.2.6.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl260ereg | 1.3.6.1.4.1.171.20.2.6.2 | |||
| dfl260eMibModules | 1.3.6.1.4.1.171.20.2.6.2.1 | |||
| dfl260e_MIB | 1.3.6.1.4.1.171.20.2.6.2.1.2 | The MIB module for D-Link DFL-260e series product. | ||
| dfl260eMibConfs | 1.3.6.1.4.1.171.20.2.6.2.2 | |||
| dfl260eStatsConformance | 1.3.6.1.4.1.171.20.2.6.2.2.1 | |||
| dfl260eStatsCompliance | 1.3.6.1.4.1.171.20.2.6.2.2.1.1 | Module Compliance | ||
| dfl260eMibObjectGroups | 1.3.6.1.4.1.171.20.2.6.2.3 | |||
| dfl260eStatsRegGroups | 1.3.6.1.4.1.171.20.2.6.2.3.1 | |||
| dfl260eSystemObjectGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.1 | System statistics Group | ||
| dfl260eIPsecObjectGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.2 | IPsec Group | ||
| dfl260eStateCountersGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.3 | Per state counters | ||
| dfl260eIPPoolGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.4 | IP pool entry objects group | ||
| dfl260eDHCPServerGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.5 | DHCP server rules objects. | ||
| dfl260eRuleUseGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.6 | Rule use objects. | ||
| dfl260eUserAuthGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.7 | User auth objects. | ||
| dfl260eIfStatsGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.8 | DFL-260e interface statistics group. | ||
| dfl260eLinkMonitorGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.9 | DFL-260e link monitor statistics group | ||
| dfl260ePipesObjectGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.10 | DFL-260e pipes statistics group | ||
| dfl260eDHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.12 | DFL-260e DHCP relay statistics group | ||
| dfl260eAlgGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.13 | DFL-260e HTTP ALG statistics group | ||
| dfl260eHAGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.14 | DFL-260e HA statistics group | ||
| dfl260eIfVlanGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.15 | DFL-260e VLAN statistics group | ||
| dfl260eSmtpAlgGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl260eSysTCPGroup | 1.3.6.1.4.1.171.20.2.6.2.3.1.17 | DFL-260e TCP buffer usage group |
RFC description
D-Link DFL-260e UTM firewall system performance metrics including CPU, memory, and connection monitoring.
Start monitoring D-Link DFL-260e NetDefend UTM firewall appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.