DF10-DCB-MIB :: dF10PFCDcbxOperState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDF10-DCB-MIBdF10PFCDcbxOperState

dF10PFCDcbxOperState

Module: DF10-DCB-MIB

OID (symbolic): DF10-DCB-MIB::dF10PFCDcbxOperState

OID (numeric): 1.3.6.1.4.1.6027.3.15.3.3.2.1.3

Node type: OBJECT-TYPE

Type: DcbState

Access: read-only

Description: This object is used to display the current state of the DCBX state machine for the PFC feature on the given port.

If state is Off '(0)', then PFC Operational(local) parameters will be same as PFC Admin Configuration Parameters and will not have any impact in the system(hardware).

If state is init '(1)', then PFC Operational(local) parameters will be same as PFC Admin Configuration Parameters.

If state is rxrecommended '(2)',then PFC Operational(local) parameters will be same as PFC Remote Parameters.

internallypropagated '(3)', In this state all the Operational(local) parameters for the feature will be same as the internal propagated information from the config source.

What is dF10PFCDcbxOperState?

Reports the current DCBX state machine state for PFC on this port: off means PFC parameters mirror the admin config but have no hardware effect; init means operational parameters equal the admin config; rxrecommended means they've been overridden by the remote peer; internallypropagated means they came from an internal configuration source port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.3.2.1.3
snmpwalk -v2c -c public <target> DF10-DCB-MIB::dF10PFCDcbxOperState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.3.2.1.3.1
snmpget -v2c -c public <target> DF10-DCB-MIB::dF10PFCDcbxOperState.1

Start monitoring Dell Networking (Force10) data center switch (DCB/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DF10-DCB-MIB::dF10PFCDcbxOperState OID value, configure state conditions and alerts, and monitor any Dell Networking (Force10) data center switch (DCB/DCBX) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3.15dellNetDcbDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3dellNetDcbApplicationObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3dellNetPFCObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3.2dellNetPFCPortTableDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3.2.1dellNetPFCPortEntryDELL-NETWORKING-DCB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.15.3.3.2.1.3dF10PFCDcbxOperStateDF10-DCB-MIB