All MIBs › DF10-DCB-MIB › dF10DCBXPortConfigTLVsTxEnable
dF10DCBXPortConfigTLVsTxEnable
Module: DF10-DCB-MIB
OID (symbolic): DF10-DCB-MIB::dF10DCBXPortConfigTLVsTxEnable
OID (numeric): 1.3.6.1.4.1.6027.3.15.3.1.2.1.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Bitmap that includes the DCBX defined set of LLDP TLVs whose transmission is enabled on the local LLDP agent by network management.
Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs.
Having the bit 'etsConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs.
Having the bit 'etsRecom(2)' set indicates that transmit ETS Recommendation TLV as part of DCBX TLVs.
Having the bit 'applicationPriorityFCOE(3)' set indicates that the LLDP transmit applicationPriority TLV for FCOE as part of DCBX TLVs.
Having the bit 'applicationPriorityISCSI(4)' set indicates that the LLDP transmit applicationPriority TLV for ISCSI as part of DCBX TLVs.
What is dF10DCBXPortConfigTLVsTxEnable?
A read-write bitmap controlling which of the supported DCBX LLDP TLVs (PFC, ETS configuration, ETS recommendation, FCoE/iSCSI application-priority) are actually enabled for transmission on this port; an admin sets these bits to turn specific DCBX advertisements on or off without disabling DCBX entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6 snmpwalk -v2c -c public <target> DF10-DCB-MIB::dF10DCBXPortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6.1 snmpget -v2c -c public <target> DF10-DCB-MIB::dF10DCBXPortConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6.1 s <value>
Start monitoring Dell Networking (Force10) data center switch (DCB/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DF10-DCB-MIB::dF10DCBXPortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Dell Networking (Force10) data center switch (DCB/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3.15 | dellNetDcb | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3 | dellNetDcbApplicationObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1 | dellNetDCBXObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2 | dellNetDCBXPortTable | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1 | dellNetDCBXPortEntry | DELL-NETWORKING-DCB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.6 | dF10DCBXPortConfigTLVsTxEnable | DF10-DCB-MIB |