DEVSERVER-MIB :: aniDevDhcpLeaseExpiration

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DEVSERVER-MIB › aniDevDhcpLeaseExpiration

aniDevDhcpLeaseExpiration

Module: DEVSERVER-MIB

OID (symbolic): DEVSERVER-MIB::aniDevDhcpLeaseExpiration

OID (numeric): 1.3.6.1.4.1.4325.2.5.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: The date and time at which the DHCP Lease will Expire.

When BSU is in point to point mode, this parameter is not applicable and will display a blank string. Similarly, for a PacketWave 610 SU, this object will display a blank string. The same applies for PacketWave 750 and for SU running in local mode.

What is aniDevDhcpLeaseExpiration?

This read-only DisplayString, up to 22 characters, shows the date and time when the device's current DHCP lease will expire, returning a blank string on devices or modes where DHCP does not apply (point-to-point BSU, PacketWave 610 SU, PacketWave 750, or local-mode SU). An admin monitors this value to anticipate and plan for lease renewal before a device could lose its IP address. For example, a value close to the current time signals the admin should verify the DHCP server is reachable so the lease renews without interruption.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.2.5.3
snmpwalk -v2c -c public <target> DEVSERVER-MIB::aniDevDhcpLeaseExpiration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.2.5.3.1
snmpget -v2c -c public <target> DEVSERVER-MIB::aniDevDhcpLeaseExpiration.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> aniDevDhcpLeaseExpiration.1

Start monitoring Aperto Networks BSU/SU fixed wireless unit (server config: TFTP/DHCP/NTP/syslog) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEVSERVER-MIB::aniDevDhcpLeaseExpiration OID value, configure state conditions and alerts, and monitor any Aperto Networks BSU/SU fixed wireless unit (server config: TFTP/DHCP/NTP/syslog) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4325aniANIROOT-MIB
1.3.6.1.4.1.4325.2deviceANIROOT-MIB
1.3.6.1.4.1.4325.2.5aniDevServerANIROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4325.2.5.3aniDevDhcpLeaseExpirationDEVSERVER-MIB