All MIBs › DEPNODE-MIB › ibmSPDepAdminStatus
ibmSPDepAdminStatus
Module: DEPNODE-MIB
OID (symbolic): DEPNODE-MIB::ibmSPDepAdminStatus
OID (numeric): 1.3.6.1.4.1.2.6.117.4.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value indicates the desired state of the dependent node with respect to its capability to handle Switch Manager protocol via its SP switch interface. If the dependent node is not in the desired state, then the SNMP Agent triggers actions to change its state to the desired state.
A value of up(1) indicates that the node should be initialized and configured sufficiently to handle the Switch Manager protocol.
A value of down(2) indicates that the node should be reset such that it is not able to receive and handle Switch Manager protocol messages on the SP switch network.
A value of reconfigure(3) indicates that the SNMP Agent must send the switchInfoNeeded trap to request new SP switch configuration information for the dependent node. This causes the SNMP Manager to send the new configuration information for the dependent node MIB objects via set-request PDU(s). Once the new values are set by the SNMP Manager, the SNMP Agent reinitializes and reconfigures the dependent node sufficiently to handle the Switch Manager protocol.
What is ibmSPDepAdminStatus?
This value specifies the desired administrative state of the dependent node's ability to handle Switch Manager protocol, and the SNMP agent takes action to bring the node's actual state in line with it. Setting it to up(1) requests the node be initialized and configured to handle the protocol, down(2) requests it be reset so it cannot process Switch Manager messages, and reconfigure(3) triggers the agent to send a switchInfoNeeded trap requesting the SNMP manager supply fresh configuration data before reinitializing the node. For example, an admin troubleshooting a misconfigured node could set ibmSPDepAdminStatus to reconfigure(3), prompting the agent to request updated switch configuration values before bringing the node back up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.117.4.1.1.15 snmpwalk -v2c -c public <target> DEPNODE-MIB::ibmSPDepAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.117.4.1.1.15.1 snmpget -v2c -c public <target> DEPNODE-MIB::ibmSPDepAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.117.4.1.1.15.1 i <value>
Start monitoring IBM SP (Scalable POWERparallel) cluster switch network with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEPNODE-MIB::ibmSPDepAdminStatus OID value, configure state conditions and alerts, and monitor any IBM SP (Scalable POWERparallel) cluster switch network from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.117 | ibmSP | DEPNODE-MIB |
| 1.3.6.1.4.1.2.6.117.4 | ibmSPDepNode | DEPNODE-MIB |
| 1.3.6.1.4.1.2.6.117.4.1 | ibmSPDepNodeTable | DEPNODE-MIB |
| 1.3.6.1.4.1.2.6.117.4.1.1 | ibmSPDepNodeEntry | DEPNODE-MIB |
| 1.3.6.1.4.1.2.6.117.4.1.1.15 | ibmSPDepAdminStatus | DEPNODE-MIB |