DELL-TL4000-MIB

All MIBs › DELL-TL4000-MIB

Description: Dell TL4000 LTO tape library MIB for monitoring product identity, status, and hardware event notifications on the Dell TL4000 tape library

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DELL-TL4000-MIB?

DELL-TL4000-MIB is a vendor-specific MIB from Dell that manages the Dell PowerVault TL4000 LTO tape library, covering product identity, overall status, physical inventory, and hardware event notifications. It exposes identity objects under TL4000Id (TL4000IdDisplayName, TL4000IdDescription, TL4000AgentVendor, TL4000IdAgentVersion, TL4000IdBuildNumber), an overall health object in TL4000Status (TL4000StatusGlobalStatus with values such as other/unknown/ok), and physical-inventory tables under TL4000Physical — libraryTable (indexed by libraryEntryId, reporting libraryState, libraryDoorState, libraryFaultFSC/Sev/Descr, slot and drive counts, and fetch/stow retry counters) and driveTable (indexed by driveEntryId, reporting driveState, driveClean, driveLoads, and soft/hard read and write error counts per tape drive). It also defines a set of TRAP-TYPE/NOTIFICATION-TYPE events under TL4000Event (eventStatusChange, eventDoorOpen, eventMailSlotAccessed, eventFaultPosted, eventRequestDriveClean, eventDriveError, eventLoaderRetriesExcessive, eventLoaderOK) covering fault, door, and drive-cleaning conditions. This is a purely vendor-specific hardware MIB with no standards-track dependency beyond basic SNMPv1 SMI imports, and it is deployed for monitoring tape-backup infrastructure health. Administrators searching for the DELL-TL4000-MIB MIB typically want it to feed library and drive status into a backup-monitoring dashboard.

IPNetwork Monitor allows you to monitor SNMP objects defined in DELL-TL4000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell PowerVault TL4000 LTO tape library

Monitoring Examples

An operator polls driveTable for a given driveEntryId to check driveHardReadErrors and driveHardWrtErrors alongside driveClean; a climbing hard-error count combined with driveClean showing the drive is overdue would indicate a tape drive needing cleaning or replacement before backup jobs start failing.

What Can Be Monitored

product identity and firmware/build version
overall library global status
library door/import-export state and fault codes
slot and drive fetch/stow retry counters
per-drive soft/hard read and write error counts
drive-cleaning and loader-fault event notifications

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
dell	1.3.6.1.4.1.674
storage	1.3.6.1.4.1.674.10893
hardware	1.3.6.1.4.1.674.10893.2
tl4000	1.3.6.1.4.1.674.10893.2.102
tl4000Id	1.3.6.1.4.1.674.10893.2.102.1
STR tl4000IdDisplayName	1.3.6.1.4.1.674.10893.2.102.1.1	DisplayString	read-only	Name of this product for display purposes.
STR tl4000IdDescription	1.3.6.1.4.1.674.10893.2.102.1.2	DisplayString	read-only	A short description of this product such as .
STR tl4000AgentVendor	1.3.6.1.4.1.674.10893.2.102.1.3	DisplayString	read-only	The name of the product manufacturer.
STR tl4000IdAgentVersion	1.3.6.1.4.1.674.10893.2.102.1.4	DisplayString	read-only	The version of this product.
STR tl4000IdBuildNumber	1.3.6.1.4.1.674.10893.2.102.1.5	DisplayString	read-only	The software build number of the product.
STR tl4000IdURL	1.3.6.1.4.1.674.10893.2.102.1.6	DisplayString	read-only	The URL of the web-based application to manage this product.
tl4000Status	1.3.6.1.4.1.674.10893.2.102.2
INT tl4000StatusGlobalStatus	1.3.6.1.4.1.674.10893.2.102.2.1	INTEGER	read-only	Current status of the product. This is a rollup for the entire agent including any monitored devices. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal.
INT tl4000StatusLastGlobalStatus	1.3.6.1.4.1.674.10893.2.102.2.2	INTEGER	read-only	The status before the current status which induced an initiative to issue a global status change trap.
INT tl4000StatusTimeStamp	1.3.6.1.4.1.674.10893.2.102.2.3	INTEGER	read-only	The last time that the agent values have been updated. The time shoule be in a relative timestamp, such as SysUpTime.
INT tl4000StatusGetTimeOut	1.3.6.1.4.1.674.10893.2.102.2.4	INTEGER	read-only	Suggested time out value in milleseconds for how long the SNMP getter should wait while attempting to poll the product SNMP service.
INT tl4000StatusRefreshRate	1.3.6.1.4.1.674.10893.2.102.2.5	INTEGER	read-only	Rate in seconds at which the agent cached data is being updated. If the value is 0 then the data is not cached. If the value is -1 then the value does not apply.
INT tl4000StatusGeneratingTrapFlag	1.3.6.1.4.1.674.10893.2.102.2.6	INTEGER	read-only	Indicates id this SNMP agent is capable of and/or is generating SNMP traps.
tl4000Physical	1.3.6.1.4.1.674.10893.2.102.3
libraryTable	1.3.6.1.4.1.674.10893.2.102.3.1		not-accessible	A table of library status.
libraryEntry	1.3.6.1.4.1.674.10893.2.102.3.1.1		not-accessible	Entry in the library Table. Each entry contains an index (libraryEntryId), and the values associated with the device.
INT libraryEntryId	1.3.6.1.4.1.674.10893.2.102.3.1.1.1	INTEGER	read-only	Table entry index value. Each unique physical device has a unique libraryEntryId.
INT libraryState	1.3.6.1.4.1.674.10893.2.102.3.1.1.2	INTEGER	read-only	Device state.
INT libraryTimeStamp	1.3.6.1.4.1.674.10893.2.102.3.1.1.3	INTEGER	read-only	Relative time in sec from power-up.
INT libraryType	1.3.6.1.4.1.674.10893.2.102.3.1.1.4	INTEGER	read-only	Device type.
INT libraryScsiId	1.3.6.1.4.1.674.10893.2.102.3.1.1.5	INTEGER	read-only	SCSI ID of the device.
INT libraryScsiLun	1.3.6.1.4.1.674.10893.2.102.3.1.1.6	INTEGER	read-only	SCSI Lun of the device.
STR libraryVendorId	1.3.6.1.4.1.674.10893.2.102.3.1.1.7	DisplayString	read-only	Library Vendor ID string as reported in a SCSI Inquiry command.
STR libraryProductId	1.3.6.1.4.1.674.10893.2.102.3.1.1.8	DisplayString	read-only	Library Product Id string as reported in a SCSI Inquiry command.
STR libraryFwLevel	1.3.6.1.4.1.674.10893.2.102.3.1.1.9	DisplayString	read-only	Library Firmware level as reported in a SCSI Inquiry command.
STR librarySerNum	1.3.6.1.4.1.674.10893.2.102.3.1.1.10	DisplayString	read-only	Library serial number as reported in SCSI Inquiry command, page 0x80.
INT libraryDrvCnt	1.3.6.1.4.1.674.10893.2.102.3.1.1.11	INTEGER	read-only	Number of drives contained in this library.
INT librarySlotCnt	1.3.6.1.4.1.674.10893.2.102.3.1.1.12	INTEGER	read-only	Number of cartridge slots contained in this library
INT libraryImpExpCnt	1.3.6.1.4.1.674.10893.2.102.3.1.1.13	INTEGER	read-only	Number of import/export elements (mail slots) contained in this library
INT libraryTranspCnt	1.3.6.1.4.1.674.10893.2.102.3.1.1.14	INTEGER	read-only	Number of transport elements (robots) contained in this library.
INT libraryMoves	1.3.6.1.4.1.674.10893.2.102.3.1.1.15	INTEGER	read-only	Total number of move operations done by this library.
INT librarySlotFetchRetries	1.3.6.1.4.1.674.10893.2.102.3.1.1.16	INTEGER	read-only	Total number of slot fetch retries by this library.
INT librarySlotStowRetries	1.3.6.1.4.1.674.10893.2.102.3.1.1.17	INTEGER	read-only	Total number of slot stow retries by this library.
INT libraryDrvFetchRetries	1.3.6.1.4.1.674.10893.2.102.3.1.1.18	INTEGER	read-only	Total number of drive fetch retries by this library.
INT libraryDrvStowRetries	1.3.6.1.4.1.674.10893.2.102.3.1.1.19	INTEGER	read-only	Total number of drive stow retries by this library.
INT libraryDoorState	1.3.6.1.4.1.674.10893.2.102.3.1.1.20	INTEGER	read-only	State of the door(s) pf this library. The interpretation of this value is vendor specific.
INT libraryImpExpState	1.3.6.1.4.1.674.10893.2.102.3.1.1.21	INTEGER	read-only	State of the Import/Export element(s) of this library. The interpretation of this value is vendor specific.
INT libraryFaultFSC	1.3.6.1.4.1.674.10893.2.102.3.1.1.22	INTEGER	read-only	The library Fault error code.
INT libraryFaultSev	1.3.6.1.4.1.674.10893.2.102.3.1.1.23	INTEGER	read-only	The library Fault severity.
STR libraryFaultDescr	1.3.6.1.4.1.674.10893.2.102.3.1.1.24	DisplayString	read-only	The library Fault description.
driveTable	1.3.6.1.4.1.674.10893.2.102.3.2		not-accessible	A table of all tape drive devices in this library.
driveEntry	1.3.6.1.4.1.674.10893.2.102.3.2.1		not-accessible	Entry in the device Table. Each entry contains an index (driveEntryId), and the values associated with the device.
INT driveEntryId	1.3.6.1.4.1.674.10893.2.102.3.2.1.1	INTEGER	read-only	Table entry index value. Each unique physical device has a unique driveEntryId.
INT driveState	1.3.6.1.4.1.674.10893.2.102.3.2.1.2	INTEGER	read-only	Device SCSI State.
INT driveTimeStamp	1.3.6.1.4.1.674.10893.2.102.3.2.1.3	INTEGER	read-only	Universal time in sec since UTC 1/1/70 when the device data was last updated.
INT driveType	1.3.6.1.4.1.674.10893.2.102.3.2.1.4	INTEGER	read-only	SCSI device type.
INT driveScsiId	1.3.6.1.4.1.674.10893.2.102.3.2.1.5	INTEGER	read-only	SCSI ID of the device.
INT driveScsiLun	1.3.6.1.4.1.674.10893.2.102.3.2.1.6	INTEGER	read-only	SCSI Lun of the device.
STR driveVendorId	1.3.6.1.4.1.674.10893.2.102.3.2.1.7	DisplayString	read-only	Device Vendor as would be reported in a SCSI Inquiry command.
STR driveProductId	1.3.6.1.4.1.674.10893.2.102.3.2.1.8	DisplayString	read-only	Device Model as would be reported in a SCSI Inquiry command.
STR driveFwlevel	1.3.6.1.4.1.674.10893.2.102.3.2.1.9	DisplayString	read-only	Device firmware level as would be reported in a SCSI Inquiry command.
STR driveSerNum	1.3.6.1.4.1.674.10893.2.102.3.2.1.10	DisplayString	read-only	Device serial number as reported in SCSI Inquiry command, page 0x80.
STR driveLibrarySN	1.3.6.1.4.1.674.10893.2.102.3.2.1.11	DisplayString	read-only	Serial Number of the library that this drive is in as reported in SCSI Inquiry command, page 0x80, for the media mover device.
INT driveTpHrs	1.3.6.1.4.1.674.10893.2.102.3.2.1.12	INTEGER	read-only	Total drive motion hours of this device.
INT driveClean	1.3.6.1.4.1.674.10893.2.102.3.2.1.13	INTEGER	read-only	Cleaning State of the device. The interpretation of this value is vendor specific.
INT driveLoads	1.3.6.1.4.1.674.10893.2.102.3.2.1.14	INTEGER	read-only	Total cartridge loads for the drive.
INT driveSoftWrtErrors	1.3.6.1.4.1.674.10893.2.102.3.2.1.15	INTEGER	read-only	Recovered soft write error count for current cartridge
INT driveHardWrtErrors	1.3.6.1.4.1.674.10893.2.102.3.2.1.16	INTEGER	read-only	Hard write error count for current cartridge
INT driveSoftReadErrors	1.3.6.1.4.1.674.10893.2.102.3.2.1.17	INTEGER	read-only	Recovered soft read error count for current cartridge
INT driveHardReadErrors	1.3.6.1.4.1.674.10893.2.102.3.2.1.18	INTEGER	read-only	Hard read error count for current cartridge
tl4000Event	1.3.6.1.4.1.674.10893.2.102.4
NTF eventStatusChangeTrap	1.3.6.1.4.1.674.10893.2.102.4.0.1			The library status has changed.
NTF eventDoorOpenTrap	1.3.6.1.4.1.674.10893.2.102.4.0.2			The library door has been opened.
NTF eventMailSlotAccessedTrap	1.3.6.1.4.1.674.10893.2.102.4.0.3			The library mail slot has been accessed.
NTF eventFaultPostedTrap	1.3.6.1.4.1.674.10893.2.102.4.0.4			The library has posted a hard fault.
NTF eventRequestDriveCleanTrap	1.3.6.1.4.1.674.10893.2.102.4.0.5			One of the library tape drives has requested a cleaning cycle to ensure continued data reliability.
NTF eventDriveErrorTrap	1.3.6.1.4.1.674.10893.2.102.4.0.6			One of the library tape drives has reported an error condition.
NTF eventLoaderRetriesExcessiveTrap	1.3.6.1.4.1.674.10893.2.102.4.0.7			The library has detected excessive loader retries.
NTF eventLoaderOKTrap	1.3.6.1.4.1.674.10893.2.102.4.0.8			The library has reverted to normal operation.
NTF eventStatusChange	1.3.6.1.4.1.674.10893.2.102.4.1			The library status has changed.
NTF eventDoorOpen	1.3.6.1.4.1.674.10893.2.102.4.2			The library door has been opened.
NTF eventMailSlotAccessed	1.3.6.1.4.1.674.10893.2.102.4.3			The library mail slot has been accessed.
NTF eventFaultPosted	1.3.6.1.4.1.674.10893.2.102.4.4			The library has posted a hard fault.
NTF eventRequestDriveClean	1.3.6.1.4.1.674.10893.2.102.4.5			One of the library tape drives has requested a cleaning cycle to ensure continued data reliability.
NTF eventDriveError	1.3.6.1.4.1.674.10893.2.102.4.6			One of the library tape drives has reported an error condition.
NTF eventLoaderRetriesExcessive	1.3.6.1.4.1.674.10893.2.102.4.7			The library has detected excessive loader retries.
NTF eventLoaderOK	1.3.6.1.4.1.674.10893.2.102.4.8			The library has reverted to normal operation.

RFC description

Manages the Dell TL4000 LTO tape library with product identification, hardware status, and configuration information.

Start monitoring Dell PowerVault TL4000 LTO tape library with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DELL-TL4000-MIB

What Is DELL-TL4000-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description