DELL-NETWORKING-DCB-MIB :: dellNetPFCDcbxOperState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDELL-NETWORKING-DCB-MIBdellNetPFCDcbxOperState

dellNetPFCDcbxOperState

Module: DELL-NETWORKING-DCB-MIB

OID (symbolic): DELL-NETWORKING-DCB-MIB::dellNetPFCDcbxOperState

OID (numeric): 1.3.6.1.4.1.6027.3.15.3.3.2.1.3

Node type: OBJECT-TYPE

Type: DcbState

Access: read-only

Description: This object is used to display the current state of the DCBX state machine for the PFC feature on the given port.

If state is Off '(0)', then PFC Operational(local) parameters will be same as PFC Admin Configuration Parameters and will not have any impact in the system(hardware).

If state is init '(1)', then PFC Operational(local) parameters will be same as PFC Admin Configuration Parameters.

If state is rxrecommended '(2)',then PFC Operational(local) parameters will be same as PFC Remote Parameters.

internallypropagated '(3)', In this state all the Operational(local) parameters for the feature will be same as the internal propagated information from the config source.

What is dellNetPFCDcbxOperState?

This read-only value reports the current DCBX state-machine phase for PFC on a port: off, init (mirrors local admin config), rxrecommended (mirrors the peer's settings), or internallypropagated (inherited from an internal config source). Admins read it to know whose PFC pause settings currently govern this port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.3.2.1.3
snmpwalk -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetPFCDcbxOperState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.3.2.1.3.1
snmpget -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetPFCDcbxOperState.1

Start monitoring Dell Networking switch (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-DCB-MIB::dellNetPFCDcbxOperState OID value, configure state conditions and alerts, and monitor any Dell Networking switch (Data Center Bridging/DCBX) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.15dellNetDcbDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3dellNetDcbApplicationObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3dellNetPFCObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3.2dellNetPFCPortTableDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3.2.1dellNetPFCPortEntryDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.3.2.1.3dellNetPFCDcbxOperStateDELL-NETWORKING-DCB-MIB