All MIBs › DELL-NETWORKING-DCB-MIB › dellNetETSDcbxOperState
dellNetETSDcbxOperState
Module: DELL-NETWORKING-DCB-MIB
OID (symbolic): DELL-NETWORKING-DCB-MIB::dellNetETSDcbxOperState
OID (numeric): 1.3.6.1.4.1.6027.3.15.3.2.2.1.3
Node type: OBJECT-TYPE
Type: DcbState
Access: read-only
Description: This object is used to display the current state of the DCBX state machine for the ETS feature on the given port.
If state is Off '(0)', then ETS Operational(local) parameters will be same as ETS Admin Configuration Parameters and will not have any impact in the system(hardware).
If state is init '(1)', then ETS Operational(local) parameters will be same as ETS Admin Configuration Parameters.
If state is rxrecommended '(2)', then ETS Operational(local) parameters will be same as ETS Remote Parameters.
internallypropagated '(3)', In this state all the Operational(local) parameters for the feature will be same as the internal propagated information from the config source.
What is dellNetETSDcbxOperState?
This read-only value reports the current DCBX state-machine phase for ETS on a port: off (admin parameters have no hardware effect), init (parameters mirror local admin config), rxrecommended (parameters mirror the remote peer's settings), or internallypropagated (parameters come from an internally designated config source). Admins read this to see whose ETS settings are actually governing traffic on this port right now.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.2.2.1.3 snmpwalk -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetETSDcbxOperState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.2.2.1.3.1 snmpget -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetETSDcbxOperState.1
Start monitoring Dell Networking switch (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-DCB-MIB::dellNetETSDcbxOperState OID value, configure state conditions and alerts, and monitor any Dell Networking switch (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.15 | dellNetDcb | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3 | dellNetDcbApplicationObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.2 | dellNetETSObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.2.2 | dellNetETSPortTable | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1 | dellNetETSPortEntry | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.2.2.1.3 | dellNetETSDcbxOperState | DELL-NETWORKING-DCB-MIB |