DELL-NETWORKING-DCB-MIB :: dellNetDCBXPortSupportedTLVs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDELL-NETWORKING-DCB-MIBdellNetDCBXPortSupportedTLVs

dellNetDCBXPortSupportedTLVs

Module: DELL-NETWORKING-DCB-MIB

OID (symbolic): DELL-NETWORKING-DCB-MIB::dellNetDCBXPortSupportedTLVs

OID (numeric): 1.3.6.1.4.1.6027.3.15.3.1.2.1.5

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: Bitmap that includes the supported set of DCBX LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management.

Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs.

Having the bit 'etcConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs.

Having the bit 'etsRecom(2)' set indicates that transmit ETS Recommendation TLV as part of DCBX TLVs.

Having the bit 'applicationPriorityFCOE(3)' set indicates that the LLDP transmit applicationPriority TLV for FCOE as part of DCBX TLVs.

Having the bit 'applicationPriorityISCSI(4)' set indicates that the LLDP transmit applicationPriority TLV for ISCSI as part of DCBX TLVs.

What is dellNetDCBXPortSupportedTLVs?

This read-only bitmap reports which DCBX LLDP TLV types the port's hardware is capable of transmitting: PFC, ETS configuration, ETS recommendation, or FCoE/iSCSI application-priority TLVs. Admins check it to confirm an interface actually supports, say, the applicationPriorityFCOE TLV before trying to enable FCoE priority advertisement on it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.5
snmpwalk -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXPortSupportedTLVs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.5.1
snmpget -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXPortSupportedTLVs.1

Start monitoring Dell Networking switch (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-DCB-MIB::dellNetDCBXPortSupportedTLVs OID value, configure state conditions and alerts, and monitor any Dell Networking switch (Data Center Bridging/DCBX) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.15dellNetDcbDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3dellNetDcbApplicationObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.1dellNetDCBXObjectsDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.1.2dellNetDCBXPortTableDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.1.2.1dellNetDCBXPortEntryDELL-NETWORKING-DCB-MIB
1.3.6.1.4.1.6027.3.15.3.1.2.1.5dellNetDCBXPortSupportedTLVsDELL-NETWORKING-DCB-MIB