All MIBs › DELL-NETWORKING-DCB-MIB › dellNetDCBXPortConfigTLVsTxEnable
dellNetDCBXPortConfigTLVsTxEnable
Module: DELL-NETWORKING-DCB-MIB
OID (symbolic): DELL-NETWORKING-DCB-MIB::dellNetDCBXPortConfigTLVsTxEnable
OID (numeric): 1.3.6.1.4.1.6027.3.15.3.1.2.1.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Bitmap that includes the DCBX defined set of LLDP TLVs whose transmission is enabled on the local LLDP agent by network management.
Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs.
Having the bit 'etsConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs.
Having the bit 'etsRecom(2)' set indicates that transmit ETS Recommendation TLV as part of DCBX TLVs.
Having the bit 'applicationPriorityFCOE(3)' set indicates that the LLDP transmit applicationPriority TLV for FCOE as part of DCBX TLVs.
Having the bit 'applicationPriorityISCSI(4)' set indicates that the LLDP transmit applicationPriority TLV for ISCSI as part of DCBX TLVs.
What is dellNetDCBXPortConfigTLVsTxEnable?
This read-write bitmap controls which of the supported DCBX LLDP TLVs (PFC, ETS configuration, ETS recommendation, FCoE/iSCSI application-priority) are actually transmitted on this port. An admin enabling converged storage traffic would set the applicationPriorityFCOE bit here so the switch advertises FCoE priority information to its DCBX peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6 snmpwalk -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXPortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6.1 snmpget -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXPortConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.6.1 s <value>
Start monitoring Dell Networking switch (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-DCB-MIB::dellNetDCBXPortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Dell Networking switch (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.15 | dellNetDcb | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3 | dellNetDcbApplicationObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1 | dellNetDCBXObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2 | dellNetDCBXPortTable | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1 | dellNetDCBXPortEntry | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.6 | dellNetDCBXPortConfigTLVsTxEnable | DELL-NETWORKING-DCB-MIB |