All MIBs › DELL-NETWORKING-DCB-MIB › dellNetDCBXAutoCfgPortRole
dellNetDCBXAutoCfgPortRole
Module: DELL-NETWORKING-DCB-MIB
OID (symbolic): DELL-NETWORKING-DCB-MIB::dellNetDCBXAutoCfgPortRole
OID (numeric): 1.3.6.1.4.1.6027.3.15.3.1.2.1.3
Node type: OBJECT-TYPE
Type: DcbxPortRole
Access: read-write
Description: Ports operating in the manual role do not have their configuration affected by peer devices or by internal propagation of configuration. These ports will advertise their configuration to their peer if DCBX is enabled on that port.
Auto-up: Advertises a configuration, but is also willing to accept a configuration from the link-partner and propagate it internally to the auto-downstream ports as well as receive configuration propagated internally by other auto-upstream ports.
Auto-down: Advertises a configuration but is not willing to accept one from the link partner. However, the port will accept a configuration propagated internally by the configuration source.
Configuration Source:In this role, the port has been manually selected to be the configuration source. Configuration received over this port is propagated to the other auto-configuration ports.
What is dellNetDCBXAutoCfgPortRole?
This read-write field sets the DCBX configuration-propagation role for a port: manual (advertises only its own settings), autoup (accepts a peer's configuration and propagates it internally to other ports), autodown (accepts only internally propagated configuration, not from the link partner), or configSource (manually designated as the authoritative source other auto ports inherit from). An admin might set a core-facing port to configSource so its DCB settings flow down to access-facing autoup/autodown ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.3 snmpwalk -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXAutoCfgPortRole
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.3.1 snmpget -v2c -c public <target> DELL-NETWORKING-DCB-MIB::dellNetDCBXAutoCfgPortRole.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.15.3.1.2.1.3.1 s <value>
Start monitoring Dell Networking switch (Data Center Bridging/DCBX) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-DCB-MIB::dellNetDCBXAutoCfgPortRole OID value, configure state conditions and alerts, and monitor any Dell Networking switch (Data Center Bridging/DCBX) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.15 | dellNetDcb | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3 | dellNetDcbApplicationObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1 | dellNetDCBXObjects | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2 | dellNetDCBXPortTable | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1 | dellNetDCBXPortEntry | DELL-NETWORKING-DCB-MIB |
| 1.3.6.1.4.1.6027.3.15.3.1.2.1.3 | dellNetDCBXAutoCfgPortRole | DELL-NETWORKING-DCB-MIB |