All MIBs › DELL-NETWORKING-CHASSIS-MIB › dellNetStackUnitNumber
dellNetStackUnitNumber
Module: DELL-NETWORKING-CHASSIS-MIB
OID (symbolic): DELL-NETWORKING-CHASSIS-MIB::dellNetStackUnitNumber
OID (numeric): 1.3.6.1.4.1.6027.3.26.1.3.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The unit number associated with this unit. The unit number can be manually assigned to stack members.
Note that the unit number assignment is based on the following factors:
- if the unit number is requested here, but another unit already uses that number, the unit changes its configured unit number to the lowest unassigned unit number. - if the unit number is 0, i.e. unassigned, then the unit sets its configured unit number to the lowest unassigned unit number. - if the unit number is configured and no other device uses the unit number, then the unit starts using the configured unit number. - if a unit detects that the maximum number of units already exist, the unit sets its unit number to 0, i.e. unassigned, and stays in the Initialization state. - The max number of stackable units allowed on this chassis is found from the object chNumMaxStackableUnits.
What is dellNetStackUnitNumber?
Read-only unit number assigned to this stack member. Dell's stacking software assigns the lowest free number automatically unless an admin has manually pinned a specific number, so this can differ from what was originally requested if that number was already taken.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.26.1.3.4.1.2 snmpwalk -v2c -c public <target> DELL-NETWORKING-CHASSIS-MIB::dellNetStackUnitNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.26.1.3.4.1.2.1 snmpget -v2c -c public <target> DELL-NETWORKING-CHASSIS-MIB::dellNetStackUnitNumber.1
Start monitoring Dell Networking modular chassis switch/router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-CHASSIS-MIB::dellNetStackUnitNumber OID value, configure state conditions and alerts, and monitor any Dell Networking modular chassis switch/router from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.26 | dellNetChassisMib | DELL-NETWORKING-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.26.1 | dellNetSysObject | DELL-NETWORKING-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.26.1.3 | dellNetStackObject | DELL-NETWORKING-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.26.1.3.4 | dellNetStackUnitTable | DELL-NETWORKING-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.26.1.3.4.1 | dellNetStackUnitEntry | DELL-NETWORKING-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.26.1.3.4.1.2 | dellNetStackUnitNumber | DELL-NETWORKING-CHASSIS-MIB |