All MIBs › DECNET-PHIV-MIB › phivControlPollingState
phivControlPollingState
Module: DECNET-PHIV-MIB
OID (symbolic): DECNET-PHIV-MIB::phivControlPollingState
OID (numeric): 1.3.6.1.2.1.18.8.5.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This value represents the state of the tributary relative to the multipoint polling algorithm. If not set the default is AUTOMATIC. The possible states are: AUTOMATIC
The tributary's state is allowed to vary according to the operation of the polling algorithm.
ACTIVE/INACTIVE/DYING/DEAD
The tributary is locked in the specified state.
NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.8.5.1.10 snmpwalk -v2c -c public <target> DECNET-PHIV-MIB::phivControlPollingState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.8.5.1.10.1 snmpget -v2c -c public <target> DECNET-PHIV-MIB::phivControlPollingState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.8.5.1.10.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.18 | phiv | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.8 | control | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.8.5 | phivControlParametersTable | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.8.5.1 | phivControlParametersEntry | DECNET-PHIV-MIB |
| 1.3.6.1.2.1.18.8.5.1.10 | phivControlPollingState | DECNET-PHIV-MIB |